How this promise of a captain’s bed came about was almost an accident. My bride-to-be is used to having a large bed, California King, to be exact. All I had was a paltry queen-sized mattress on a relatively low frame. She commented that I probably stuck out over both ends when I slept (I’m 6’ 4”), and I had to agree with her. She also did not (understandably) want to share a bed with me that I had shared with my last (deceased) wife. So, I went and bought a Cal-Ki...
I am just posting my journey for my upgrades to the Harbor Freight Dust collector I got. I have been using it stock except for the wynn filter cartridge and have been happy with it so far, however I have been getting some leaks and will smell the wood dust coming from the collector after cutting items. So I figured if I am going to seal the leaks, I better just build a whole new cart and add a Thien Separator. The first post here is detailing the Thien Separator. I went over to his we...
Well here is my latest sled design. This sled is a combination of many sleds that i have seen in the past. One sled that really influenced it, is the super sled by john nixon at eagle lake woodworking. I like the t track on the sled part (the sheet part) but i am going to use real t track. I also liked the t track on top of the fence, which i incorporated, but it stops there. This sled should be able to do just about everything. You can cut 45’s ( blade tilting at 45 deg ) and every o...
Since I can’t afford a bunch of quarter sawn white oak to finish the dining table right now, I thought I’d look for a project that requires less materials. Having just read “Longitude” by Dava Sobel, I’ve been fascinated by wooden clocks. Being a Mechanical Engineer, I also have an affinity for anything with gears. I found woodgears.ca few years ago and have been fascinated by the stuff he makes. I’ve also looked into building some kind of kinetic sculp...
I grabbed a Dewalt Dado set off Amazon for a song a while back, thanks to the wonderful deal hound at Woodnet. So I loaded that up, got a good fit, and began to run down some Dados Then I began to glue & brad the chassis together. I set that aside so that the glue could dry, and moved on to the drawers. I broke down the ply, and laid them all out. Before I assembled, I did a big tape-up, tossed on some cheap sacrificial borg ply on the bottom, and drilled the...
NOTE All of my photos have been migrated to a new provider, and the links in my posts are likely out of date. You can find the photos here. So, I’ve needed a router table, and I wanted an nice big surface area. I’ve used some of the lighter weight ones before and didnt’ care for them. The only product I used that I liked was the Bench Dog with the CI top, and the whole system, including a nice beefy 3HP router would have set me back around $1500. I couldn’t se...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- A journey into the workshop. - 106 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 419 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries