I started this project when we found out we were expecting our first kid. After shopping and not finding anything I liked for the money so I set out to design my own. I wanted a crib that could be broke down and stored when not in use. I bought roughsawn red oak from a local mill an hour from my house. There were a couple things I tried in this project I have never tried before design wise. After trying them, some of those expiriments will not happen again. I tried to make it all part ...
I started this project when we found out we were expecting our first kid. After shopping and not finding anything I liked for the money so I set out to design my own. I wanted a light design and could be broke down and stored when not in use. I also didn’t find many other ideas out there so I hope this may inspire some more ideas. The idea is while he will still be nursing several times a night he can sleep safely next to the bed but not in it. I Used Red Oak and Walnut scrap...
I finally completed the Crib, have it assembled and it is in use. I got a couple questions about the mounting hard ware. The side pannels are removeable. They are supported by Mortise and tennon joints and a screw from the side pannel will lock into a threaded insert along the corner posts. I wanted to conceal as much hardware as I could, and the open part on the side pannels will be capped. The matress frame attaches directly to the corner posts to threaded inserts at four different...
I am happy to announce the safe arrival of my very first grandchild.Her name is Olivia MarieShe was born July 23 rd at 5 pm and she weighed 8 lbs 14 ounces. I will post a few as soon as i can get one. thanksjohn
See HERE for completed project Recently, I bought a Grizzly bandsaw. One of the reasons I decided to buy a bandsaw was to re-saw lumber for use on a scroll saw. The scroll saw was my first ‘tool’ that I bought, and before, I was limited to purchased plywoods for my scroll saw cuts. I was quite surprised at how much wood can be obtained from a single length of wood when re-sawn. It will definitely expand my creativity for such projects. Outlined is the first such project ...
Well, as some may have seen, I recently finished building a bassinet for my upcoming child. Well, on Friday morning at 7:23 AM, my wife gave birth to a beautiful baby girl, Maddison Sierra, who weighed 6 lbs. 11 oz., and was 21 inches long. Below I’m posting a link to some pics of here as well as posting a pic here. Pictures of Maddison Sierra
My wife and I are expecting our first child in February. This after 2 years of trying. Needless to say, we are very excited. This, of course, is my chance to build some baby furniture and spend a little time in the shop that isn’t work related. No real deadlines, and the freedom to use all of the creativity I want. What could be better. There is one other reason I’m building these 2 items. I’d really like to build something that my daughter will have when she gets married...
My wife and I are expecting our first child to be born in the first part of September. I am going to attempt to build some baby furniture for him. I have never built any baby furniture and would love to get some ideas, suggestions, input from those that have. I think we have decided on building a crib. We haven’t decided on whether to build a convertible crib or just a regular crib. My first question is that when you change the convertible crib into a full size bed, what do you do...
Times, they are a changin’. Our newest addition is here – a healthy girl born yesterday. I have, of course, pictures on Flickr and a blog post at my personal site. I even have my first video uploaded to Flickr! Head over to the Gradin.com blog to see the updates.
I don’t have much time to post this, so it will be short. Two days ago, on August 8th, I became a father. My beautiful wife gave birth (via C-section) to a beautiful baby girl, Molly Hannah. She was only 19 inches long but a healthy 9 lbs 3.6 ounces. So, I have a good excuse for missing the DeCou LumberJock picnic. I’ve got to get back to the hospital now. I’ll post some photos on Flickr later on. (I know this isn’t about woodworking at all. Sue me.)
- My Journey As A Scroll Saw Pattern Designer - 1186 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1208 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 202 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- scottb - 144 entries