Please click here for this image heavy post. For those of you who don’t know me, I am an amateur astronomer (besides dabbling in woodworking, writing, art, etc…). I started an astronomy at Wordpress lately to post pictures I’ve been taking through my telescope and other tidbits. I thought of a way yesterday to merge my two biggest hobbies, astronomy and woodworking. I decided to make a base for my Telrad reflex sight, to fit atop the Texas Yard Cannon. And, to make...
To see more pictures of the project, click here. Continuing work on the Telrad base was easy—-cloudy nights=busy days. I added a wedge to the front of the Telrad base to make it more secure when attached, shaped the whole thing and made some nice edges. I think this is just going to be an experiment in getting it done—-if I like how it handles in the field, I may make it out of oak or something more stable and solid than pine (this was all pieces of 2×4 cutoff). I h...
At last it was time to fabricate a handle lever to attach to the rover—-oh, and complete the installation of the upper half of the platform. As planned, the lever contraption will allow me to easily lift (critical now that my back has been injured and is on the mend) and move the rover/telescope combination.The idea was simple: cut two blocks of tubafore, round the top on both. Drill a 5/8” hole that lines up on both. Attach said blocks with glues and screws to the tongue of th...
With the approach of Comet ISON and the Mars 2014 apparition getting under way and me out of commission for the past 2 months with a back injury, I have been chomping at the bit to (1) get observing and (2) get cracking on the hiss drive rover. It’s been a few months since the last entry (which I thought I had published already but…oops…it was still a draft until tonight) but all the real progress has taken place in the last three days or so. To start, I constructed so...
Building off the early success of this project in it’s second incarnation, I started to dismantle the old telescope base and reuse the wood which, conveniently enough, was just the right size. First up, I ripped apart the top of the old base and installed those planks cross-wise on the bottom of the rover to give it lateral support. With the extra strength and weight of these planks, this thing already feels more stable than the old base! Once the slats were glued and nailed ...
I had planned on attaching the top of the rover to the base today…I really did. But alas….only halfway there. In order to attach the hinge in the right spot and allow the base to be uniform and not off center, I needed to shift the hinge to the side of the 1/2” plywood. That being the case, there’s not much plywood there on the edge for attaching hinges that will hold the top half of the base and a $350 telescope. So I improvised—-I attached a strip o...
Now the fun part begins. This project is all well and good as a telescope base (albeit one that opens up and has the potential to dump my yard cannon on the ground in a shattered mess)....but I designed it as a hiss drive primarily, and a telescope mobility platform secondly. It’s time to get drivin’. Going off what I found on the internet I gathered the following supplies: One inner-tube (a 14” non-highway trailer inner-tube from Menard’s I think). On...
- My Journey As A Scroll Saw Pattern Designer - 1614 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1639 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- shipwright - 222 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- robscastle - 181 entries