So after much research and debates, I have finally charged the card, and 2 days later the delivery arrived with the new saw in the box (I opted to have it delivered from the store as opposed to pick it up myself – at 450lbs, I simply wouldn’t be able to unload it myself) Delivery from HD was swift and smooth, positive and friendly guy stop at my place saturday morning, and helped me position the box in my garage – I couldn’t be happier (took 5 minutes, 4.5 of those was...
Sketchup Models of Shop Furniture for a Small Shop #1: Mobile Shelves, Expandable Assembly Table and Materials Cart
I have a small shop, about 200SF. It’s not as small as it once was, about 90SF, and it’s not as big as what I hope to have some day, about 600SF. To keep from climbing over things and make it easier to move things around to accomdate the operation of the moment, I thought I would adopt the “everything on wheels” strategy and double up what tools I could in single cabinets. So, to make sure that I had the right designs and that everything would fit in the shop and ...
In this final section of the Wine Cork Display Tutorials I will show you how I cut and glue in the miter keys. Larger Picture Version LJ Project of Finished Displays Here you can see my miter key jig. Since I cut so many miter keys for the wine cork displays and the boxes I make, I decided that a nice, large, dedicated jig would save me a lot of time. It works really well, I’ve used the heck out it. The first thing I do is figure out how far from the edge I want my keys to...
In this tutorial, I’ll show how I glue and assembly my wine cork displays. If you’re interested in a version with larger pictures, follow the link below: Bigger Picture Version Now that I’ve got my glass, I can begin the glue-up. However, I suggest sanding the inside first, one less thing to deal with later. I begin by laying my pieces down on my table with the inside facing down and the front facing away from me. I use a piece of MDF to make sure the front edges...
I have been gearing up for a particular project. In preparation I have been doing a bit of research on using hide glue. For the purist, it is best to use a glue brush without a metal ferrule. The reasoning behind this is the metal ferrule can potentially cause a black stain. There are brushes available for hide glue but there are rather expensive. For the time being, I am spending shop funds on materials and tools. The focus of this blog is to show an inexpensive alternative to an expensiv...
Alright, did a lot of work the past while, even though it seems like I haven’t. I’ve been busy working!I started with the footboard, I first lined all the slats up in between the rails. This was probably one of the most frustrating parts of this whole project. Once I got them all pretty well in there, I attached the rails to the legs and that sorted out the slats for the most part. Once I did that, I noticed that my mortises and slats and stuff didn’t quite look as nice a...
We moved to our new home in northern Illinois more than a year ago and I spent a lot of time planning the shop, drawing plan after plan, searching the net for ideas and so on.To give her credit, my wife tired of the plans (even though I told her it was half the fun) and gave me a SawStop Professional Cabinet Saw for Christmas! If you wonder why I went hog-wild with a SawStop, I’ll tell you that one of my long-standing rules, even back in my days up north was “nobody gets injured, ...
When designing the shop I tried to anticipate the type of work we would be doing. Looking back, I wasn’t even close. However, in spite of that, the work flow is very much the same for many woodworking projects. Our shop is laid out considering that work flow. Our entrance door is where we unload both sheet goods and solid lumber. We stack the lumber on stickers, prior to use, and the plywood is placed on a drywall cart. We place lumber on the chop saw station, which ...
I was able to finish up my work table this weekend. Well, all but chamfering or rounding over the edges. I took thursday and friday off. Friday because it was beautiful. And thursday (St. Patricks Day) because it was my daughters 2nd birthday. But I got up early on thursday and made it out to pick up a couple sheets of 3/4” plywood, a plywood blade for my circular saw, and oak for the edges. While I was cutting the plywood down on friday afternoon, I either burnt up my saw or com...
We got a fantastic Jet lathe in the workshop recently and decided to make a video of the assembly process. It’s pretty straightforward, but could be handy for reference before you try to put yours together. :)
- My Journey As A Scroll Saw Pattern Designer - 1199 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Workshop Development - 67 parts
- As The Lathe Turns - 67 parts
- Sheila Landry (scrollgirl) - 1221 entries
- frank - 417 entries
- degoose - 388 entries
- dbhost - 333 entries
- Ecocandle - 325 entries
- MsDebbieP - 301 entries
- Martin Sojka - 297 entries
- Karson - 294 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- mafe - 208 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- stefang - 146 entries