Refers to project posted here. The dry fit passed inspection from my quality inspector so it was time to move on to finishing. I disassembled it to three major components and put on Minwax Dark Walnut Stain. Of course I did this on my finishing/pool table. You can see the unstained head sitting on the table also. I installed the handle in the head with glue and two finish nails through the edge to hold it steady. I am using Waterlox Original Medium as a sealer and it’...
Hello everyone, I will be doing a Special Broadcast with my Son This evening. He received a Bi Plane for his 8th Birthday, He’s been watching me in my Shop and on my Scroll Saw and he seems very interested and eager to learn the trade himself. So I am going to introduce him to the World of Woodworking and Scroll Sawing. In this Broadcast, you will have a Chance to Talk with my Son, have him Answer some Questions to the best of his Knowledge, which will be limited of course, ...
Wow. I’ve had a busy weekend, but unfortunately I was not able to finish as much as I wanted. Since I knew I was going to be using my router, I first fixed the problem I had with it. I cut my stock to width and length, and I regret having cut the carcase pieces it to length. This made the next step, running it through the router, much trickier, since I had to use my push-pad to control a 3-1/2” long piece as it was getting a rabbet cut on it! It wanted to pull itself into th...
When designing the shop I tried to anticipate the type of work we would be doing. Looking back, I wasn’t even close. However, in spite of that, the work flow is very much the same for many woodworking projects. Our shop is laid out considering that work flow. Our entrance door is where we unload both sheet goods and solid lumber. We stack the lumber on stickers, prior to use, and the plywood is placed on a drywall cart. We place lumber on the chop saw station, which ...
Hey everybody. I know I have mentioned a few times that I would soon have a video coming out for a torsion box assembly table. Well, that time has come. There are two videos: The Torsion BoxThe Base Downloadable plans, a text writeup, and shortened video clips can be found on Finewoodworking.com’s site at:http://finewoodworking.com/thewoodwhisperer(just click the featured videos in the right column) Thanks and enjoy!! marc
Good times Let's Get Ready To Rumble!!!! (Poly) Time for the last coat before work. Luckily it goes on smooth. T - 8 Hours Mission assemble the cabinets and attach face frames. We decided to atttach the frame to the cabinet that needed a flush edge first. Then screw the second cabinet to this assembly. Don't worry OSHA.. This is a staged shot. Actual brad nailing involved safety glasses We used basic brads to attach the face frames. The assembly of the cabinets. Chicag...
- My Journey As A Scroll Saw Pattern Designer - 1598 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1623 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 219 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries