So after much research and debates, I have finally charged the card, and 2 days later the delivery arrived with the new saw in the box (I opted to have it delivered from the store as opposed to pick it up myself – at 450lbs, I simply wouldn’t be able to unload it myself) Delivery from HD was swift and smooth, positive and friendly guy stop at my place saturday morning, and helped me position the box in my garage – I couldn’t be happier (took 5 minutes, 4.5 of those was...
Now we are ready to flip everything right side up and install the mobile base at the same time, so here goes….First we size everything to fit.It’s magic!!! In the twinkling of an eye, Oh I forgot to say Abracadabra, Presto Chango….And we have exactly 31 inches. Just what we were shooting for.And for our metric measuring Lumberjocks….Metrics!!!And we still have the Grizzly medallion and the model number is till readable.And now we get rid of the corrosion inhibitor stuf...
When designing the shop I tried to anticipate the type of work we would be doing. Looking back, I wasn’t even close. However, in spite of that, the work flow is very much the same for many woodworking projects. Our shop is laid out considering that work flow. Our entrance door is where we unload both sheet goods and solid lumber. We stack the lumber on stickers, prior to use, and the plywood is placed on a drywall cart. We place lumber on the chop saw station, which ...
Oh, yeah, it’s time to stop cutting bait and ‘fish’ for a next-level assembly with this project. In other words, this carcase has been apart and together a bunch of times for marking, cutting, and fitting rabbets and dados. All of those shelves and partitions are at the ready; there’s nothing more do do with the carcase apart that can’t just as well be done while it’s together. In the meantime, I have T&G back-cabinet material as well as face framing th...
This one is almost stupid, but it happens to still be helpful. On a through mortise you can center your work on a dog hole and some of the random chips will fall through it rather than get jammed into the bottom, where you will have to extricate them later. And Now…a bonus tip!!! When test fitting a mortise and tenon joint take care not to snag anything important… You have been warned and so have I. Cheers, Ryan
It’s the JET – JSG-96CS: 6’’ x 48’’ Belt / 9’’ Disc Sander w/ Closed Stand, 3/4HP 1Ph, 115V. It arrived by pallet in two boxes: Right away the 3/4HP motor and belt seemed bigger than I’d imagined this past year or two (this has been on my wishlist for awhile now). I had even scaled up my mental image, but it was still bigger than I thought: The closed stand is a very thick sheet metal, and heavier than I expected. It was a...
Well, the day came and my new Grizzly G0555X bandsaw arrived along with the moblie base and riser kit. Here, I’ll talk about how I single handedly assembled both the mobile base to fit the stand and the riser kit. My hope that whatever little inspirations I had may help someone else down the road. Let’s start with the mobile base (32 bolts and all make it quite time consuming)Here you have your choice of bolt up through the casters and nut on top or bolt on top. Personally, ...
Sketchup Models of Shop Furniture for a Small Shop #1: Mobile Shelves, Expandable Assembly Table and Materials Cart
I have a small shop, about 200SF. It’s not as small as it once was, about 90SF, and it’s not as big as what I hope to have some day, about 600SF. To keep from climbing over things and make it easier to move things around to accomdate the operation of the moment, I thought I would adopt the “everything on wheels” strategy and double up what tools I could in single cabinets. So, to make sure that I had the right designs and that everything would fit in the shop and ...
my first adventure into the wonderful world of DRAWBORING was a great experience. it was not difficult and the results are amazing. drawboring is pegging a tenon into a mortise with the peg-hole in the tenon shifted slightly toward the shoulder causing the peg to tighten up the joint I used red oak 1/2” dowels from lowes. I took my time going through all their stock to choose the straightest grain dowels. the ideal would be to make my own from riven white oak, but the red oak work...
Hey everybody. I know I have mentioned a few times that I would soon have a video coming out for a torsion box assembly table. Well, that time has come. There are two videos: The Torsion BoxThe Base Downloadable plans, a text writeup, and shortened video clips can be found on Finewoodworking.com’s site at:http://finewoodworking.com/thewoodwhisperer(just click the featured videos in the right column) Thanks and enjoy!! marc
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries