Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...
Thanks for joining us for the third installment of “Intarsia Basics” and this is where it starts to get really fun. Cutting out the pattern is one of the best parts of doing this kind of art. It takes a little practice to get used to using your saw. You can look up some practice patterns or just make some zig zags, loop the loops, straight lines, gentle curves, and circles on a piece of paper and glue to a practice board. Cut out some of these and you will start getting used to the “feel ...
Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
I just wanted to update on the status of the class and inform every one of the delay. For those of you that do not know, I had a misfortunate (stupid?) accident and broke a bone in my right hand a couple of weeks ago. I was hoping that I had progressed far enough beforehand that it would not affect the class. Unfortunately the bones are not healing correctly and it is taking longer for ir it to heal. I tried again tonight, but do not have enough dexterity or hand strength to sand while I...
Thanks for joining in again and I apologize for the delay. Hand is doing a lot better and it feels great to be back in the shop. Thanks for your patience and your encouragement to get better. In this section we will focus on shaping and sanding our pieces. In my opinion, this is the most important part of the process. Depth is what makes a piece really stand out and the more depth you use in your project the better you’re going to like the end result. We have all seen intarsia pieces...
Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...
I had a very productive day yesterday. I was able to get the next candle tray cut out entirely, as well as sand and finish the butterfly tray and the new one. The more I work with my new saw the more I like it. I have never had a lamp that was attached to the saw like that before and it is a vast improvement over having my little task lamp and having to move it around so that I can turn my pieces when cutting. It is great that it is out of the way. There are however a couple of things ...
I finished the Gingerbread Candle Tray set yesterday. It was near-done for the past couple of days, but I finished cutting and staining the little charms and doing the photography on it. I think it came out OK. It isn’t one of my most intricate projects, but I found that a lot of people are interested in it and I think it will be a nice and quick project to get done in time for the holidays. Here are the pictures of the finished holder: From SLD337 Gingerbread Candle Tray and Ch...
Little by little I am beginning to feel a bit better. I felt better yesterday than Monday and I feel better today than yesterday. As long as I feel there is improvement, I am happy. I went to see my own doctor yesterday and she confirmed that there was swelling in my back. I got one more prescription to help with that so hopefully that will also help me get back to normal quickly. I was happy to hear from her that she thought I should move around and not just stay sitting or in bed. In ...
This week I decided to make a two fer project..lol… It is a 2 sided game and message board. On one side you have a checkerboard and on the other side a chalkboard. It is meant to hang on the wall so the checkerboard and checkers are magnetic. The main frame is Maple, the checkerboard is oak and aspen with the boarder being mahogany. The chalkboard is birch plywood primed and 3 coats of chalkboard paint. And it is finished with Tung oil Varnish
- My Journey As A Creative Designer - Woodworking and Beyond - 1783 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1808 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 236 entries
- Dave Rutan - 228 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 204 entries
- Smitty_Cabinetshop - 195 entries