Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...
Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...
Thanks for joining in again and I apologize for the delay. Hand is doing a lot better and it feels great to be back in the shop. Thanks for your patience and your encouragement to get better. In this section we will focus on shaping and sanding our pieces. In my opinion, this is the most important part of the process. Depth is what makes a piece really stand out and the more depth you use in your project the better you’re going to like the end result. We have all seen intarsia pieces...
Thanks for joining us for the third installment of “Intarsia Basics” and this is where it starts to get really fun. Cutting out the pattern is one of the best parts of doing this kind of art. It takes a little practice to get used to using your saw. You can look up some practice patterns or just make some zig zags, loop the loops, straight lines, gentle curves, and circles on a piece of paper and glue to a practice board. Cut out some of these and you will start getting used to the “feel ...
Things to make with 3/4" inch cast iron Clavos #1: Bought some of these big door nails on sale at Van Dykes
I bought 72 of these nails for Clearing tile frame idea … and others
More progress on Jim’s light plates has occurred lately. Here’s the update: I took the piece of siding that he gave me and measured out where the crests and valleys were on the back of the wood and went to town with chisels and Kröktskaft. Boy, aspen sure does pare nice and smooth with little effort (well, sharp tools help too): In short order I had carved out a nice groove on each piece that fit perfectly onto the siding: With the exception of the fact that my plan ha...
I spent most of the day yesterday playing around with video stuff and reading about it. Usually Sunday is my painting day and with Christmas only a few weeks away I probably should have been working on my gifts, but I couldn’t help but explore this new ‘toy’ that I have discovered. I like the Windows Movie Maker software. (Now don’t start throwing rotten tomatoes at me! – I know anyone who says they like anything Windows puts out is instantly labeled “...
I’ve been working for about two weeks off and on now on this project and I was so engrossed with that I didn’t even remember to post my regular blog updates. Oops. So this is a big catch-up post…. It all started with my desire to practice skills. I had a pile of scrap laying around and one afternoon it hit me (the design, not the scrap). Here’s the design: As you can see, it’s just a simple box. But I wanted to work on my joining skills, I wanted to u...
I had a very productive day yesterday. I was able to get the next candle tray cut out entirely, as well as sand and finish the butterfly tray and the new one. The more I work with my new saw the more I like it. I have never had a lamp that was attached to the saw like that before and it is a vast improvement over having my little task lamp and having to move it around so that I can turn my pieces when cutting. It is great that it is out of the way. There are however a couple of things ...
- My Journey As A Scroll Saw Pattern Designer - 1486 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 93 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- Sheila Landry (scrollgirl) - 1510 entries
- frank - 417 entries
- degoose - 394 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- mafe - 240 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- shipwright - 203 entries
- Todd A. Clippinger - 197 entries
- stefang - 186 entries
- Rustic - 186 entries
- Chris Davis - 183 entries
- BritBoxmaker - 177 entries
- PurpLev - 163 entries