Hello to all and all are Welcome, Intro: Hi, my name is Kory Kiker and a couple of weeks ago Ms. Debbie contacted me about conducting an online class for those interested in learning the art of intarsia. I was very excited about the chance to share a few things I have learned in the last three years of doing intarsia art. Before intarsia I did a lot of wood carving so I hope this helps give each project more depth and definition. I will tell you now that most of the things I’ve lear...
Intro: Hello to all and welcome to the first installment of Intarsia Basics. Before we can start cutting we need to select the wood we want to use and get our pattern ready. Wood Choices: I prefer to start with stock that is one inch thick because that gives you a lot of depth that you can work with. It will require a little more sanding on some areas but it will help to give your piece a 3D look. It is your choice if you prefer to stain your wood to achieve the colors or use exot...
Welcome back and again sorry for taking so long to get this post out. After my hand healed I was really backed up on some other projects. I’m almost caught up and will post some of those projects on my page in the next couple of days. When we left off we had all the sanding done and are ready for staining and finishing. I’m making two of these frogs, one that will need staining and one out of exotic wood so everyone can participate in this project. We will go over staining next. I’m...
I had a very productive day yesterday. I was able to get the next candle tray cut out entirely, as well as sand and finish the butterfly tray and the new one. The more I work with my new saw the more I like it. I have never had a lamp that was attached to the saw like that before and it is a vast improvement over having my little task lamp and having to move it around so that I can turn my pieces when cutting. It is great that it is out of the way. There are however a couple of things ...
I spent most of the day yesterday playing around with video stuff and reading about it. Usually Sunday is my painting day and with Christmas only a few weeks away I probably should have been working on my gifts, but I couldn’t help but explore this new ‘toy’ that I have discovered. I like the Windows Movie Maker software. (Now don’t start throwing rotten tomatoes at me! – I know anyone who says they like anything Windows puts out is instantly labeled “...
The Commission About the beginning of May, I met with a friend of a friend at their new photography studio in Fairbanks, Alaska. Heath and his wife Audrey worked the last several months to establish their business in a new location and they had a need for some specialized woodworking. Between the two, it’s obvious that they have a complimentary advanced sense of design and spacial relation. On entering the new studio and office of Focus Unbound Photography, it’s immediately apparen...
I finished the Gingerbread Candle Tray set yesterday. It was near-done for the past couple of days, but I finished cutting and staining the little charms and doing the photography on it. I think it came out OK. It isn’t one of my most intricate projects, but I found that a lot of people are interested in it and I think it will be a nice and quick project to get done in time for the holidays. Here are the pictures of the finished holder: From SLD337 Gingerbread Candle Tray and Ch...
Thanks for joining in again and I apologize for the delay. Hand is doing a lot better and it feels great to be back in the shop. Thanks for your patience and your encouragement to get better. In this section we will focus on shaping and sanding our pieces. In my opinion, this is the most important part of the process. Depth is what makes a piece really stand out and the more depth you use in your project the better you’re going to like the end result. We have all seen intarsia pieces...
Little by little I am beginning to feel a bit better. I felt better yesterday than Monday and I feel better today than yesterday. As long as I feel there is improvement, I am happy. I went to see my own doctor yesterday and she confirmed that there was swelling in my back. I got one more prescription to help with that so hopefully that will also help me get back to normal quickly. I was happy to hear from her that she thought I should move around and not just stay sitting or in bed. In ...
I just wanted to update on the status of the class and inform every one of the delay. For those of you that do not know, I had a misfortunate (stupid?) accident and broke a bone in my right hand a couple of weeks ago. I was hoping that I had progressed far enough beforehand that it would not affect the class. Unfortunately the bones are not healing correctly and it is taking longer for ir it to heal. I tried again tonight, but do not have enough dexterity or hand strength to sand while I...
- My Journey As A Creative Designer - Woodworking and Beyond - 1749 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 109 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Toy costruction - 85 parts
- Life as an Amateur Woodworker - 80 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- Sheila Landry (scrollgirl) - 1774 entries
- dbhost - 427 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 250 entries
- Betsy - 228 entries
- stefang - 221 entries
- robscastle - 218 entries
- Dave Rutan - 216 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 192 entries