The first Art Box I completed and later posted was “Rachels Box”. I wasnt sure how it would be received, but it was a big hit right off the line. It just recently topped over 10,000 views and is the most viewed box on LJ. Wow! http://lumberjocks.com/projects/tag/box/by/views Its popularity and the ones that followed were what motivated me to post the tutorial which was a help to many.http://lumberjocks.com/Argyllshire/blog/9415 I still get mail asking about this style of box...
I couldnt find any info that explained how to make bent inlays without using a router and a template, which is time consuming and limiting. I thought about using the bandsaw to make S shaped cuts and inserting pliable strips, but thought that the rough cuts made by the course teeth would show up, but I was encouraged after reading Blogs by Patron and Degoose on making double curve lazy susans. The cuts were made on the bandsaw and the pieces mated up just fine. So, I made a test piece. I trie...
I am starting a simple blog on how I made my candies for the box called “Eye Candy” This will work as a blanket answer to all the questions I have recieved on this. Its pretty obvious that they are no more than glued up woods of contrasting colors, but this will give insight on how I did it.I am working on pictures at this point and some will be posted in the next chapter, hopefully tonight. So follow along if you are interested.Also, I want to thank everyone again for voting and ...
Updated 1/15/12 Regarding wood movement:Depending on the wood you use, where you live, and your own personal experience,y ou may want to allow more clearance.This is what works for me. I really dont allow for any movement at this stage. I know this sounds like trouble waiting to happen, but it works just fine for me. Even if we start off with a snug fit, we will still end up with a small gap around the perimeter. This is due to the final sanding and easing of the edges between lid and l...
Part 3updated 1/15/12 Regarding size:Size and proportions are important…to a point. We will be building a box that will start out at 11 1/8 W x 7 D x 4 1/2 H. (After shaping it will finish out at about 10 3/4’’ x 6 3/4’’ x 3 1/8 h depending on how much shaping is done.) I like the proportions of this box, they just look good to my eye. They are loosely based on the Golden Ratio which is a ratio of 1.618. There is much more to it than that, but simply put, here is how it works in rela...
- My Journey As A Creative Designer - Woodworking and Beyond - 1742 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 107 parts
- Workshop Development - 107 parts
- Just for Fun... - 97 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 79 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- Sheila Landry (scrollgirl) - 1767 entries
- dbhost - 420 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- mafe - 304 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 246 entries
- Betsy - 228 entries
- stefang - 220 entries
- robscastle - 218 entries
- Dave Rutan - 214 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 194 entries
- A Slice of Wood Workshop - 190 entries