I wiped on two coats of General Finishes Arm-R-Seal yesterday. That certainly went easier for me than the amber Shellac did when I tried to brush it on this wormy maple. These coats of sanding sealer look good. I am warming up my shop so I can wipe on two or more coats today. Then I will probably spray on either clear Shellac from a can or a Spar Polyurethane to protect this blanket chest’s finish. I took a close-shot of the chest’s dovetails, and also its plinth. I do l...
If this project was for myself I would probably still use Shellac for its finish, clear but not amber. I would follow the suggestions I have received here to rub on the Shellac. I would not attempt to brush it again on this project. What I have learned is that applying Shellac takes a very trained and experienced hand, for a brushed on finish for sure. Watching Chuck Bender brush on Shellac makes it look too easy. There are years of experience in his badger hair brush strokes, For this ...
Kind of a sad topic, but so it is. A good friend of ours died a couple of months ago and her husband commissioned me to make some cedar boxes for her and her sister. The sister died 2 years before, also from breast cancer. They were both still in their 50s.He provided the wood and asked for plain wooden boxes. Humph- I don’t DO plain, so I figured I’d do what I wanted and just charge him for plain boxes.These are the pieces of 1’ x 1” boards after I planed, sawed them,...
Lots of vegetable gardening done in the past couple of months, and it could not wait, so the harp building project had to wait a while. Finally last week I got back into it after 6 weeks of seldom working on it. Now it is almost done- but let me go back to where I left off in March.I had these beautiful abalone mother-of-pearl wings provided to me by a fine Lumberjock. She also did a great blog about how to do inlays, and that was very helpful to me. I didn’t follow instructions exactly...
Oil-based finishes are typically the first type of finish we confront as woodworkers, be it straight oil or a can polyurethane. Although they are all derived from oil, these finishes can vary widely in terms of application method, durability, and maintenance. The key to understanding these finishes is to understand their ingredients. With that foundation in your tool belt, you can start looking at ingredients lists instead of brand names and labels, and you’ll know exactly what to ex...
An important aspect of building furniture that many new woodworkers overlook, is the importance of finishing BEFORE the project is completely glued together. That’s the primary focus of this part of the series. A few of the topics covered in this part: How to deal with color differences between plywood and solid wood trim. Raising the grain and applying water-based dyes. Theory and application of wiping varnish. Creating shelf pin holes for adjustable shelving. Applying ang...
Well the frame is finally done and its time for the best part the finish ;) so i started off as usual with a fresh frame sanded to 180 my first 3 coats were General Finishes Natural Danish oil and this really brings out all this hickory’s got. i think that this is a prime example of how as Charles Neil stated in his video that the colors that really bring out the wood are the ambers and the yellows (not the exact statement but in the ball park) and i think this is a golden exa...
- My Journey As A Creative Designer - Woodworking and Beyond - 1792 parts
- Extremely Average - 324 parts
- Toy costruction - 115 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Woodworking on a Half-Shoestring - 82 parts
- Life as an Amateur Woodworker - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1817 entries
- dbhost - 436 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 313 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 241 entries
- Dave Rutan - 231 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- A Slice of Wood Workshop - 210 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- Smitty_Cabinetshop - 195 entries