There are so many outstanding saw restorations on LumberJocks, I hesitate to post my first attempt. But I have a cheap saw that has the potential to be a good user, so here goes. =========== Edit #3 ===============Now a third saw, a D-8 thumbhole variety…. See blog entries in posts below.================================= ========== Edit #2 =================Okay, here’s another saw for my own type of refurb. First I drilled a ‘new’ blade to match up with a ...
OK, it didn’t really start HERE, but way back about the time I signed up for lumberjocks when I got these applewood logs. I already mentioned it in a previous post, but for those that did not read it here it is again (if you’ve read it you can skip to step 3) The Applewood Logs Story2007, I was just getting into woodworking, had a circular saw, drill, and a router. my wife saw an add on craigslist giving away applewood. I went to see the guy, a nice older woodworker that was mo...
Had some good progress on the garage reorganization, Although it may not look like it. To start, I wanted to tackle all the medium sized lumber that was now roaming around, scattered on the floor in various locations as it no longer had a dedicated place. I had 4 kitchen cabinets that I got off of craigslist a couple of years ago hoping it’ll help me get organized, but in the end, it just took wall space, and didn’t prove to be very useful, as it was just left as is, and ended ...
I found figuring out how to make these ornaments quite a fun challenge. (I already posted this video in my projects, but apparently that does not get it onto the LumberJocks Video Page) http://lumberjocks.com/projects/57125#comment-1116565
With the blade hardened it is time to make a proper handle. In a previous blog I stabilized a fine piece of spalted apple. That is what I am going to use to make the handle.Chuck it up in the lathe and cut a section of copper tubing for the ferrule.I begin by making the blank round and cutting down on one end for the ferrule.Here I have it fit.Mix up some epoxy and spread it on the ferrule stub and in place the ring on the finger.After the epoxy cures I mount the blank into my scroll chuck ...
My fathers neighbor recently cut down one of his apple treesAnd this morning my father called and wondered if i wanted to have some of it, so we went over and loaded it all up on the trailer, well all but 1 huge piece that must have weighed 300kg or so, unfortunately he had already promised that piece for his son -.- (probably gonna make firewood out of it cries) So i got all the other large branches and stuff, some of it was rotten before they cut it down by the looks of it, and theres so...
Well . . . I jumped ship from Windows to Apple. After working with windows from 3.1 thru 7 I slid a Mac Pro in next to the Dell M90. It is a different, very different experience. I spent a lot of time at the Apple store, trying to do some of the kinds of things that i use a computer for. The people were very helpful with questions, and left me alone to “putz”. I finally took the plunge! I decided to try to totally stop thinking Windows and approach the Apple as if it was my...
I found time to get some shop time, and wanted to get back on track and get this project going (hard to do after a long pause). last time around I was milling the lumber, when my planer broke down on me in the middle. I have then milled some boards with hand planes, and fixed my planer, but at this point, I was a bit confused what was milled already, what thicknesses, and how much material do I have (more of a do I have enough? curiosity). I still had to mill the apple lumber and add it as...
About three weeks ago I scored a full truck load of mulberry from a tree that had been cut down last November. The tree was over 100 years old, and around 36” diameter and over 100’ tall. Unfortunately the tree had been cut into chunks 24” and under. I got about 60 board feet of mostly quartersawn wood out of it that will most likely get used for bookmatched panels, boxes and picture frames for gifts for the family. It is really beautiful wood with a fleck pattern that remin...
I replaced the old screws that holds the iron and ship-breaker with some of brass. Flattened their heads and gave them a nice chamfered ring. A wile ago i got some pieces of Norwegian west coast grown apple from a friend. Having saved it to make a new handle and knob to a jackplane I restored this summer (another project soon to come) and decided to match up the filletster. It has an beautiful warm glow to it and I think it would ad both warmth and enjoyment to the touch and feel to th...
- My Journey As A Creative Designer - Woodworking and Beyond - 1783 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 110 parts
- Workshop Development - 107 parts
- Toy costruction - 107 parts
- Just for Fun... - 98 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 81 parts
- Woodworking on a Half-Shoestring - 78 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1808 entries
- dbhost - 432 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- mafe - 307 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 236 entries
- Dave Rutan - 228 entries
- Betsy - 228 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries
- A Slice of Wood Workshop - 204 entries
- Smitty_Cabinetshop - 195 entries