117 days ago
by Gary Fixler |
9 comments »
This past Wednesday, all in the span of an hour lunch break, I ran home, cut a chunk off the end of one of the Jacaranda logs from my recent haul, resealed the main log with Anchorseal and washed out the brush. Sliced the chunk in half through the pith, and turned one into a thin-walled, simple bowl, took a quick shower, and brought the resultant piece back to show off at work. Amazing what can happen in one hour! The turning itself took less than 15 minutes! I’m getting faster, if not ...
Read this entry »
127 days ago
by Gary Fixler |
10 comments »
This past Sunday I decided to saw a Y-shaped Ficus log in half and get some bowl blanks out of it. I couldn’t fit the 14” section under my band saw’s 12” vertical clearance, so I just cut the first half, up to the Y split. Then I spent about 20-30 minutes sawing through the Y with my 24” carpenter saw. Good workout!
I could fit a 10-7/8” circle on each log in the Y area, which I wanted to try turning for the twists in grain and color.
I had to...
Read this entry »
161 days ago
by Gary Fixler |
22 comments »
Let me show you why tonight’s shop-time sucked…
Sigh… So I had a 2gal bucket of Anchorseal – prized wood end grain sealer for drying logs and planks. I was carrying it to a spot in the shop where I was to seal up a bunch of European olive bottle blanks I resawed and cut up from a large log tonight. My foot got hung up really well on something – maybe my rolling stand – and I lurched forward hard. Of course, I never trip like that, but since I was car...
Read this entry »
222 days ago
by Gary Fixler |
4 comments »
Previously:Wood IDs #6: Found Eucalyptus tree in LA - part 1 of 3Wood IDs #7: Found Eucalyptus tree in LA - part 2 of 3Wood IDs #8: Found Eucalyptus tree in LA - part 3 of 3
It’s a bit labor intensive getting all the bark and Eucalyptus Longhorned Borer bug excretion cleaned off the Eucalyptus tree I cut up into logs from a nearby neighborhood. It dawned on me a couple weeks ago that I could use a wire wheel brush in my drill press. I’ve used the technique to brush up aluminum ...
Read this entry »
