This eagle is part of St. John’s statue from 17th century altar from Moravian village Dolní Dunajovice (Czech republic). Eagle’s wings was lost and replaced with paper ones. When we removed the paper, some notes and music sheets was discovered in it. Schoolmate Petr did some research with professors from local university department of music history and they think it could be from year 1630. I made a right wing, left was made by next schoolmate. More photos later. :) Photo of al...
I was asked to build a Chuppah for a wedding using small diameter, nearly green aspen logs. It was a challenge finding the logs but building it sure was fun! How do you incorporate logs into a wedding? It seems to be a growing trend – this is the third wedding project I’ve worked on. Please share things you’ve made for weddings by posting pictures below! If it’s a log item, I’ll share it on my FaceBook page with a back link to your page!
Rockin’ Knot ....my angles are true,rockin’ knot declares it’s self,tung oil gives good sheen….—by flp ——————————————————————————————————————————————————R...
I have moved this information over from the Church Lectern project as I think it cleans up the Project Posting better, as most of this extra information was really just Blogging material. So, if you read this information in the Project Posting, then there is nothing new here. Let me know what questions you have, and I would also enjoy hearing tips from each of you on how you work with clients. I’m just figuring this out myself, so I have a lot to learn.- – - – - – -...
I am so excited this morning. Why you ask? I’m complete with the St. Anthony Church Side Altar commission project. I have more work to do on other pieces for the church by the end of the month. So, there isn’t much time to take a breath yet, but the completion of the Side Altars is a huge milestone for me, and my woodworking career. To be honest, there were some times that I wondered if I would ever get all of the details of these Altars complete. Total working time is a...
I wanted to tell a little more about my experience with crafting my own crown molding, and share a couple of lessons I learned along the way. Previously, I showed how I formed and sanded the profile on the last blog of this topic, and so today I thought I would complete the task by showing the installation of the molding, and a few “gems” I discovered along the way. First off, I made very sure that my cabinet that I am hanging this crown molding on was as perfectly square on...
My wife is gone for a few hours this Saturday morning, and the kids are busy watching a video, so I will update you on what I am working on now. I’m right in the middle of a “fun” project. It is “fun” on many levels, mostly because I have had to stop and scratch my head a lot. For those of you with kids, or remember having kids, or know someone who has kids, Winnie the Pooh always says, “Think, think, think” while poking his temple when he is try...
I have been waiting for several weeks for the arrival of the Church Altar that I am to copy and make two Side Altars to match. The Altar was delivered to my shop this past Saturday, and I am told that the down payment check is in the mail. Of course, the Altar looked smaller in the big church room. And, I started to “cold-sweat” a little looking at the task before me. I like new projects that have elements that make me sweat and worry, so this is right up my alley, so to spe...
I am so excited, I just received a call this evening that my bid on the church Side Altars has been accepted. I will start the detail design, material acquisition and planning this week, and will get started on building the project around Thanksgiving, with a 12-14 week schedule expected. Thanks,Mark - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - – - –...
New Bid SubmittedThis morning I sent out my bid for a commissioned job to build two side altars for a church, matching the old original center altar. After spending so much time estimating and pondering if I left anything out, or put too much in the bid, I am glad I have finally made the decision, typed it up, and sent it out. This project will involve some pretty complicated woodworking, the type of challenge that I like. The church board will review the bids this weekend, and I should kn...
- My Journey As A Scroll Saw Pattern Designer - 1187 parts
- Extremely Average - 324 parts
- A journey into the workshop. - 87 parts
- Daily Update - 87 parts
- Just for Fun... - 81 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- The Craftsman's Path - 67 parts
- As The Lathe Turns - 67 parts
- Workshop Development - 65 parts
- Sheila Landry (scrollgirl) - 1209 entries
- frank - 417 entries
- degoose - 387 entries
- dbhost - 331 entries
- Ecocandle - 325 entries
- MsDebbieP - 300 entries
- Martin Sojka - 297 entries
- Karson - 293 entries
- William - 249 entries
- Betsy - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- mafe - 204 entries
- Todd A. Clippinger - 187 entries
- Chris Davis - 183 entries
- Rustic - 183 entries
- PurpLev - 162 entries
- shipwright - 160 entries
- BritBoxmaker - 159 entries
- scottb - 144 entries