LumberJocks

Woodworking blog entries tagged with 'alder'

  • Advertise with us
View Gary Fixler's profile

found wood #13: wood gloat: superior grade alder scraps

08-13-2009 09:43 AM by Gary Fixler | 12 comments »

I can’t believe it’s been just over 3 weeks already since I picked this stuff up. This year is cruising past me. I saw an ad one morning – only a few minutes old – for a very large pile of scrap wood, mostly superior-grade alder, but with a mix of some other things in there, like plywood, and walnut. I wrestled internally for a bit. Do I really need more wood? The answer, it turned out, was yes. I wrote, mentioned I was a budding woodworker, and would love to find uses...

Read this entry »


View WoodJediNTraining's profile

Make a Simple Lift Lid Box

03-29-2013 10:26 AM by WoodJediNTraining | 9 comments »

In this video I show you how to make a simple yet elegant lift lid box. These little boxes can be made with with different woods to give them their own character, and due to the simplicity they can be made in batches.. They make a great gift to give someone. The boxes in the videos are made from Spalted Pecan, White Oak, & Mahogany. Each Box was finished with 2 coats of Danish Oil to bring out the natural beauty and color of the woods. Also in the video I talk about an upcoming project...

Read this entry »


View WoodJediNTraining's profile

Shadow Casting Lamp

09-12-2012 04:59 PM by WoodJediNTraining | 7 comments »

This shadow casting lamp creates a cool effect to any room by casting a shadow on a wall of any scene you’d like to create in the lamps silhouette panels. For this project I used horses. The front of the lamp shows a horse in a natural calm state on all 4’s . And the frosted front panel of glass gives a nice subtle tone of light to illuminate the room. The back of the lamp has a silhouette of a horse raring on it’s hind legs. This is the side that casts a shadow on...

Read this entry »


View OregonBurls's profile

Drying Burl Wood #1: Drying Domestic Burl Wood: Consideration #1

08-27-2012 04:29 PM by OregonBurls | 5 comments »

Hey to all you LJs, Consideration #1 I thought that I would start a series on drying green domestic burl wood. With burl wood the end grain is going every direction and is under more internal pressure thus making it want to self destruct. Green burls or straight grain have two places where water finds its home. Inside the cells and outside the cells, this is called bound water (inside the cells) and free water (outside the cell walls). Free water is easier to escape than the bound wa...

Read this entry »


View WoodJediNTraining's profile

Building a Tablesaw Base Part 1

04-11-2013 12:15 AM by WoodJediNTraining | 13 comments »

Recently I had a need to build a new table saw base for my saw. Rather than just building a simple replacement base, I opted to build one with lots of storage potential. This new base measures 6 feet long by 2 feet wide, which gave me good reason to move over to the new shop building. I haven’t yet finished the new shop set up ( haven’t even started) but this build is a great start giving me lots of options for storage potential… This build is a 2 part project. So be sure to...

Read this entry »


View Woodwrecker's profile

Getting an early start

08-11-2011 05:38 AM by Woodwrecker | 12 comments »

I belong to the Central Florida Woodworkers Guild, who are a bunch of really nice and really talented guys.Every year, the guild provides ornaments to the Orlando Festival of Trees as a means to support the arts and to help out the guild. This past week, I scroll sawed some ornaments to help out with the annual drive.I’ll bring them to our meeting tomorrow night.I used a bunch of different wood scraps I had, and just opened this and that can of finish.(But it’s funny that I al...

Read this entry »


View pjones46's profile

Preventing Blotching Using A Wash Coat #1: Finishing with Wash Coats

01-04-2015 03:10 AM by pjones46 | 2 comments »

Wash Coat #1: Finishing with Wash Coats I am starting to put together an article covering finishing and this will be part of the coverage but not just limited to preventing blotching as a wash coat will aid in a more consistent staining color. This will be updated as my thoughts are organized. This is only a small portion: A wash coat is a coat of thinned finish that’s applied to bare wood to partially seal the surface before a stain is applied. It reduces the amount of stain from so...

Read this entry »


View WoodJediNTraining's profile

Whirligig Wars Project Contest

07-11-2012 11:40 PM by WoodJediNTraining | 14 comments »

A Simple Design of Ocala has teamed up with Woodworking For Mere Mortals to you bring you the fans and viewers a great Contest.We want you to build a Whirligig, of any shape or size! We are looking for creativity and just an all around fun project from you. and the best part is, you have a chance to win some Awesome Prizes!!This contest is sponsored by Laguna Tools which provided us with some amazing items to give away. A Complete List of Prizes is below with the Contest Details.Also Wood...

Read this entry »


View Retsof's profile

Steam Bending #1: Steam Bending A Trout Fishing Net

09-27-2012 02:18 AM by Retsof | 7 comments »

Fly fishing is one of my other hobbies and like wood working, it can be very expensive. Thankfully, I’ve been fly fishing for close to 25 years and gradually acquired some really great gear that will last a lifetime. To keep costs under control, I like to tie my own flies and build as much of my own gear as possible. I built a custom fly rod back in 1998, and it is still my favorite (a 9ft 6wt on a Winston 3-piece LT blank). I was able to save 60% off the stock rod by building it ...

Read this entry »


View SmartCutter's profile

Carpenter Cut - Optimal cutlist diagram for iPad/iPhone

11-23-2011 04:03 PM by SmartCutter | 7 comments »

After my previous post here, I got numerous feedback and great ideas from professionals on this site on how to optimize the cutlist diagram to make it useful for professional wood workers. This lead me to develop “Carpenter Cut” app for iPad/iPhone devices. It goes like this: Start with a sheet of plywood (e.g. 48×96), tell it the dimensions and quantity of each part you want to cut from it. Specify the kerf (size for your saw blade (0.125 is the default)), and indicate gr...

Read this entry »


« prev 1 2 3 4 5 6 ... 13 next »
126 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com