I have been reading and commenting recently about shop air filtration and the concern for it. My decision to write this was to give the LJ’s community some facts about air filtration. Let me start with my knowledge base. I started my own air filtration business after my son was diagnosed with severe asthma at the age of 18 months. He is now 20 years old. My wife (an RN) and I immersed our selves into learning as mush as we could to make his breathing easier. We attended numerous seminar...
This is a basic explanation of what an ERV or an air exchanger is and how it might be used in a woodworking environment. What happens is it takes a portion of the inside air and exhausts it outside. At the same time it takes the outside air and brings it in. But, while doing that it takes the energy (heat or A/C) from the inside air and either warms or cools the incoming outside air, but, without mixing the two. So you are not bringing back in the bad inside air but transferring it’s e...
Dungeon to Lair: That's the plan at least... #7: Breathing easier, as I save the world!!! (UPDATE! 2/26/13)
UPDATE: 2/26/13Install pictures in POST # 21Additional Filter relocation info/pictures in BLOG # 21, of this series! Greetings All, Welcome to my WORKSHOP! I CAN say that now, as I am able to work in it. I haven’t really made progress toward organization or efficiency, which makes the work I do do that much more difficult (hee hee, I said do do, in my best Butthead voice ). In my previous two blog entries, I had cut the 3/4” ply for my air cleaner (A. C.) & relocated ...
My “new” air cleaner has now reached a state of completion. I started with a free squirrel cage fan from an old A/C unit. Then I constructed a box to house it and affixed two 16×25 electrostatic MERV 11 filters, one on each side. I am not sure how long the MERV 11 filters will last in a shop environment. From what I have read a higher MERV would be desirable, but those seem to have such a short useful life that they are not practical. Each of the MERV 11 filters has ahe...
As winter comes up on the horizon I will be doing most of my work with the garage closed. That will make my dust problems even worse. I have had Asthma all of my life. It improved as I reached adulthood but probably not as much as it would have if I had not been smoking a pack a day for 15 years. Hey if you drank a fifth or two of Vodka a day you would smoke too! LOL All I can say for that is my 7 year old son got me to stop smoking last Christmas by telling me not to bother coming back in...
Well, it all started out with a trip to buy an air cleaner off of craig’s list some time ago. I saw a used Jet AFS-1000B for sale for about $150. After checking out the spec’s, I thought, gee, this would work great, 30×24x12, that’s not too big, I can find a place for it…. Drove about 1.5 hours round trip to discover that hey 30×24x12 is actually too BIG! I imagined myself hanging this thing near the step down that I have entering my garage and knocking mysel...
I planned on buying one of these, but I would rather spend the money on tools that directly impact the quality of my projects. I built this using an attic fan that I was given, some left over wood and a scrap piece of extension cord. I purchased the furnace filters (there are 3 of them in different MERV ratings), the hinges, the clasp, the electrical switch and box. The only thing i need to do is build the blade guard on the exhaust side, add some eyes for hanging and then figure out whe...
In a previous blog entry, I started to document the building of my ambient air cleaner. I didn’t do a blog on it’s completion and the WW gods spited me for it….. I initially installed 2 pre-filters (intake side) and a third MERV 12 filter on the exhaust side. After building the air cleaner, I learned that this arrangement is not recommended. I found out why! It seams that the filter, placed after the squirrel cage blower, puts back pressure on the fan and causes the motor...
Following many entries by other lumber jocks, I purchased an “on sale” box fan and two filters. I made a small frame to hold the filters and attached them to the $14 fan. Other’s seem to think that this rig provided adequate filtration. We’ll see. If it works even semi well it will be worth it.
This past weekend was labor day in america so i decided to spend a lot of time working in my shop. Just had an idea to help improve the shop some. My shop is in the basement of my apartment/townhouse. I dont have much room down there and i knew there were some issues so i decided to start to fix some of them. The first was my issue with dust. My apartment’s HVAC is in the basement like most houses. There is an air intake to the whole apartment as well in there. That is an issue for m...
- My Journey As A Scroll Saw Pattern Designer - 1600 parts
- Extremely Average - 324 parts
- Workshop Development - 107 parts
- Just for Fun... - 96 parts
- A journey into the workshop. - 89 parts
- Daily Update - 87 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- As The Lathe Turns - 76 parts
- WoodWriting Haiku Thursday's --by RusticWoodArt - 74 parts
- ScrollSaw Information and Resources - 68 parts
- Sheila Landry (scrollgirl) - 1625 entries
- frank - 417 entries
- degoose - 397 entries
- dbhost - 390 entries
- Ecocandle - 325 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- mafe - 279 entries
- William - 258 entries
- Betsy - 221 entries
- shipwright - 221 entries
- Stevinmarin - 212 entries
- Gary Fixler - 204 entries
- Todd A. Clippinger - 199 entries
- stefang - 198 entries
- Rustic - 188 entries
- BritBoxmaker - 187 entries
- Chris Davis - 183 entries
- Smitty_Cabinetshop - 176 entries