I was able to work on this a little more today. Time was somewhat stretched but I was able to put the shelves on. I still have to add a hose holder, handles, and the tires but its getting there. I am a horrible klutz at times and try to keep the floor as litter free as possible. The last thing I need is a tool that rests on the floor, complete with 50 feet of hose to trip over. This gives me a place to store my nailers, nails, little compressor doo-dads, and a place to set tools, t...
For a while I’ve been pondering upgrading my HVLP spray setup. After exploring the turbine vs. conversion gun issue I decided to go with a conversion gun setup. The next step was deciding on a compressor. Initially I was looking at 20 gallon sized portable compressors and trying to find one that would supply enough air to spray with any gun that I wanted to spray with. That was hard to find. I was stuck on portable because I really didn’t have room in my shop for a big stationary ...
Well, I have been slowly working on the this project over the last couple of weekends, but had to side track when my Air Compressor blew a gasket in the pump mechanism and I had to replace it (Turns out Good). With me having to work in the very hot loft to get this fixed I decided to go for broke and get all of my Compressor related sub projects taken care of. I had a slow leak on the unloader line, so I fixed that when I added the Automatic Drain Valve from Harbor Freight, thanks Patrick. I ...
I’m sure draining an air compressor of any accumulated water is possibly one of the least-fun maintenance activities out there. I’m assuming also that most compressors have virtually no room to fit a bucket underneath the drainage port at the bottom of the tank, so you end up having to tilt the unit to drain, which means not all the water gets out. I used a short piece of air hose (4’), a pair of 3/8 barb x 1/4” NPT fittings, a 1/4 NPT x 1/4 NPT close elbow, and a s...
Every second week, Harbor Freight has their standard HVLP (purple) gun on sale for $15 or sometimes even $10 but the box warns you that you need “X” amount of air to operate it. I say fooey! My small Craftsman pancake compressor advertises 2.7 CFM at 40PSI which is far below the advertised 6 CFM that the gun requires. Perhaps the HVLP gun has a similar “over-specification” as their 2HP dust collector? With the tank full and the regulator set at 50 PSI (while holding...
having trouble with the inbed. here is the link https://youtu.be/dCLX7ICcP7Y
I bought a used Shopsmith Mark V about four years ago. It came with a whole bunch of extras, but until recently I had never tried out what looked like an air compressor and spray attachment. I admit it looked a bit scary to me :) But when I cleaned out my shop today (a floor remodel is coming soon), I figured blowing compressed air around with one fan on the south window and another on the north window would be great to get get rid of all the dust along the walls (I have a shelving system sal...
...Because this can happen to yours too. Regulator didn’t shut off and it overfilled with me standing 10ft away. It flew 10ft through my shop (luckily in the opposite direction) and the blast wrecked everything within 15ft. Just wanted to say something so that it might not happen to someone else. I didn’t even register the fact that it had been running a while after I had stopped spraying paint.
DeVilbiss Recalls Air Compressors Due to Fire Hazard U.S. Consumer Product Safety CommissionOffice of Information and Public AffairsWashington, DC 20207 FOR IMMEDIATE RELEASEFebruary 3, 2011Release #11-117 Firm’s Recall Hotline: (866) 220-5627Sears Recall Hotline: (888) 279-8013CPSC Media Contact: (301) 504-7908 DeVilbiss Recalls Air Compressors Due to Fire Hazard WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission, in cooperation with the firm named belo...
Here’s another recall which might be of importance to some of you LJs. FOR IMMEDIATE RELEASEAugust 30, 2012Release #12-269 DeVilbiss Recall Hotline: (866) 885-1877Craftsman Recall Hotline: (888) 710-9282CPSC Recall Hotline: (800) 638-2772CPSC Media Contact: (301) 504-7908 DeVilbiss Air Power Co Recalls Air Compressors Due to Fire Hazard WASHINGTON, D.C. – The U.S. Consumer Product Safety Commission, in cooperation with the firm named below, today announced a voluntary ...
- My Journey As A Creative Designer - Woodworking and Beyond - 1814 parts
- Extremely Average - 324 parts
- Toy costruction - 130 parts
- A journey into the workshop. - 115 parts
- Workshop Development - 107 parts
- Just for Fun... - 98 parts
- Woodworking on a Half-Shoestring - 91 parts
- Daily Update - 87 parts
- Life as an Amateur Woodworker - 82 parts
- "Hobbit Holes in MyWorld" --by RusticWoodArt - 77 parts
- Sheila Landry (scrollgirl) - 1839 entries
- dbhost - 448 entries
- frank - 417 entries
- degoose - 397 entries
- Ecocandle - 325 entries
- mafe - 322 entries
- MsDebbieP - 314 entries
- Karson - 305 entries
- Martin Sojka - 296 entries
- Dave Rutan - 265 entries
- William - 258 entries
- shipwright - 254 entries
- robscastle - 253 entries
- Betsy - 228 entries
- A Slice of Wood Workshop - 221 entries
- stefang - 221 entries
- Stevinmarin - 212 entries
- bandit571 - 211 entries
- Todd A. Clippinger - 207 entries
- Gary Fixler - 204 entries