LumberJocks

Woodworking blog entries tagged with 'acme rod'

  • Advertise with us
View Daniel Solowiej's profile

Make a Moxon Benchtop Bench - Part 1

05-19-2017 10:05 PM by Daniel Solowiej | 11 comments »

Hello everyone ! Today I share with you the first part of making a Moxon Benchtop bench.This is a project in process, done exclusively with hand tools from the beginning to the end, whose objective is to have a solid and transportable bench, to use standing, sitting and on the floor, with a Moxon vice and dog holes.I am also planning to build the dogs too, at the end of the project, we will see if I succeed.In this Part 1, the wood chosen to build it is “guayubir√°” (Patagonula ame...

Read this entry »


View Jeremiah's profile

Leg Vise, Shop made #2: Time to start over from scratch

10-22-2013 03:10 PM by Jeremiah | 8 comments »

Here is the leg vise i made, it works OK, but i can tell the force it puts on the mounts i made are going to fail over time. (see pic below) Then i came across this picture of an old black smith vise and wondered why hadn’t anyone one done one like this before? seemed simple, strong and fairly fool proof (ie Me Proof) So off i went to build my own:1st i turned a wheel using 2 pieces of 6/4 hard maple, laminated together.then i epoxied and pinned some 3/4” acme rod...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com