Woodworking blog entries tagged with 'a'

  • Advertise with us
View NewEnglandsWoodWorks's profile

How to Remove Rust From a Tablesaw

09-29-2012 05:04 PM by NewEnglandsWoodWorks | 17 comments »

Sorry if you get invalid parameters heres the link if it doesn’t work:

Read this entry »

View AlexHarris's profile

Homemade Bandsaw Build

08-12-2011 01:29 PM by AlexHarris | 18 comments »

Hey LJ! So a few weeks back I posted some mid-project photoes of how my bandsaw build was going and although it is not entirley finished and still needs little extras like a coat of paint, a stand and a fence I can now show you the fully working and (built bandsaw). Heres a quick video showing the build process… Enjoy! Its been a great project and I hope to soon post another video showing it in all of it glory.

Read this entry »

View Calgirl's profile

Finally, My Dream Shop #11: AND THERE WAS LIGHT

11-22-2007 01:29 AM by Calgirl | 12 comments »

Well, I have three flood lights (but no bulbs yet) and one two-tube flourescent. Finally I have electricity! I have found that if I start working out there at about 10 in the morning, by 2 in the afternoon, I have to take a break to rest my back. Then after supper, I’m ready to get back to work. So far I have made a “scooter” to help me get all the heavy stuff out there. I’m going to tackle the drill press and maybe the lathe tonight.How glorious it will be to see...

Read this entry »

View Calgirl's profile

Finally, My Dream Shop #10: He says I can start moving in.....

11-20-2007 03:30 AM by Calgirl | 7 comments »

The Gen’l Contractor says that I can start moving in, even tho we have not had the final inspection. He had to have the plans redrawn because I moved the doors and windows. Then he has to have the plans stamped by the city before he can call for the “dry-in” and the final inspection. The target date is Wednesday but he is concerned that the holiday week will cause delays. So, I can start moving in, I just can’t place any insulation or wallboard yet. But, I can sta...

Read this entry »

View Calgirl's profile

Finally, My Dream Shop #8: Rest Stop !

10-31-2007 09:16 PM by Calgirl | 3 comments »

Wow, I’m bushed. Everything is as cleaned up as it is going to be, Someone on the cement crew liked candy bars because there are at least 6 wrappers scattered about, but my back is too sore to pick them up tonight. The lumber will be delivered tomorrow. My contractor wanted to give the cement (especially the driveway) another day to cure, so the framing won’t start until Friday. I’m supposed to figure out where to put the porta-pottie and the dumpster…......heck, h...

Read this entry »

View Calgirl's profile

Finally, My Dream Shop #7: There is Certainly No Drought Here!

10-28-2007 08:22 PM by Calgirl | 5 comments »

You would think that the trades would take Sunday off especially since it continues to rain intermittantly, but the electrician just left after installing the outlets that will be in the middle of the slab. The form (cement people) fellows were here yesterday afternoon placing rebar in the foundation and doing a little more compacting. I think they are going to try to pour cement tomorrow, however, the plastic barrier has not been placed and a part of the form where they drove their mini-tr...

Read this entry »

View Calgirl's profile

Finally, My Dream Shop #6: Good to Go

10-14-2007 06:13 PM by Calgirl | 5 comments »

Well, the stumps are ground and we’re ready to start bringing in the fill and preparing the foundation this week. We have the permit and zoning approval. The cement sub came out and placed flags for the extension off of the driveway, and also to demark where the foundation of the shop will sit. My contractor says that it will take 4 trucks of fill for the driveway extension and the shop foundation. They are going to have to approach the shop on the grass beside the driveway and will...

Read this entry »

View Calgirl's profile

Finally, My Dream Shop #5: Do tadpoles jump? ~ And, I GOT GOOD NEWS TODAY, I THINK.

10-10-2007 01:30 AM by Calgirl | 5 comments »

Whatever is in the “pond” where my shop will soon be jumps. They are tiny things so I can’t describe them but they jumped out of the way as I paddled thru on my tractor lawn mower. At times I needed fins and I almost got stuck several times in the mud. But, be it known that I was successful in cutting the water off at grass height, and we are good to go for the tree trimming tomorrow. The “Tree People” are going to bring something to lay down over some of the...

Read this entry »

View Douglas Bordner's profile

Ms Debbie P's 2007 Shop Tour and Inspection #4: Tuesdays With Lee

07-31-2007 07:33 AM by Douglas Bordner | 28 comments »

This week Ms. Debbie P visits the shop of Lee A. Jesberger Lee is a professional woodworker, inventor, entrepreneur, and a model Lumberjock. He has prepared several blog series including some very detailed entries on vacuum clamping, veneering, jigs and fixtures and tool-making. He maintains a website with a vast array of tutorials : Here Deb takes the readings on a positioning jig to hold work steady during carving. That is one swell post he is working...

Read this entry »

View Lee A. Jesberger's profile

Veneering #1: A Primer Course

07-12-2007 06:35 AM by Lee A. Jesberger | 19 comments »

Veneering, a Primer Course The top photo is a couple sample packs of sequenced matched veneers from Woodcraft supply.The secong photo is bookmatched Camphor veneer.The third photo is Bruce holding a sample of Avodire Crotch veneer, with No Finish on it. Some of you may have noticed my slight addiction to working with veneers. When you start to investigate the available veneers on the market, it becomes very difficult for me to understand the resistance to it that some people have....

Read this entry »

1 2 next »
11 entries

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics