LumberJocks

LumberJocks Woodworking Blogs

  • Advertise with us
View mafe's profile

Mr. Christopher Schwartz's rude answer (not so) Popular Woodworking Magazine

03-11-2011 05:44 PM by mafe | 101 comments »

Popular Woodworking Magazine – Mr. Christopher Schwartz rude answerbe careful with readers contributions, ‘Tricks of the trade’. Finally the answer came from Popular Woodworking Magazine, and what an answer. Since the last blog I have asked the magazine their opinion of their policy, and received an answer that they would talk about it, but then nothing happened. Those who have not followed the last blog can get the story here: http://lumberjocks.com/mafe/blog/21419 So...

Read this entry »


View TheGravedigger's profile

New Post on the Little Good Pieces Blog: Shaving Rack - Part 2

03-11-2011 04:40 PM by TheGravedigger | 0 comments »

There’s a new post on the Little Good Pieces blog: Shaving Rack – Part 2. I deal with the peculiarities of ebony and the difficulties of small-scale mortise-and-tenon joinery. Check it out! http://littlegoodpieces.wordpress.com/2011/03/11/shaving-rack-part-2/

Read this entry »


View gpastor's profile

Walnut log Big bucks funny stuff

03-11-2011 03:13 PM by gpastor | 27 comments »

Seen this on youtube, funny stuff. “All too typical discussion between a clueless guy with a walnut yard tree and a man who runs a sawmill” http://www.youtube.com/watch?v=agcLlKcXp40

Read this entry »


View MyChipCarving's profile

Chip Carving Class - Quilt Squares #5: Lesson Pacing (reply requested)

03-11-2011 01:33 PM by MyChipCarving | 25 comments »

This class is new territory for me and for LumberJocks. To help me pace the lessons properly, please reply to this posting with one of the following: REWIND – slow down, I need to look at Lesson 1 PAUSE - give me a day or two and I”ll be ready for the next lesson PLAY – I’m ready for the next lesson FAST FORWARD – crank it up! I’m ready and rarin’ to go! Marty LeenhoutsMy Chip Carving866-444-6996

Read this entry »


View Sheila Landry (scrollgirl)'s profile

My Journey As A Creative Designer - Woodworking and Beyond #281: Sad News

03-11-2011 12:58 PM by Sheila Landry (scrollgirl) | 7 comments »

I woke up this morning to news of the earthquake in Japan. I don’t even have “regular TV”, but get my news in the form of the NY Times and Chicago Tribune in my email box every day. I try not to dwell on the news, but I do like to stay informed. Many times it is overwhelming for me. Since joining here at Lumberjocks, I have met many people from all around the world. There are also many that I haven’t really interacted with, but I have sat back quietly and admire...

Read this entry »


View stevengaletodd's profile

Powermatic 45 Lathe #1: Bought a 1967 PM45 lathe

03-11-2011 07:32 AM by stevengaletodd | 8 comments »

I picked up a 1967 Powermatic 45 lathe that I hope to restore. It wasn’t in the best of shape, but there where no cracks in the casting, it ran and I only paid $200 for it. Included in that, there was about 6 face plates, four sets of cheap tools (one harbor freight set never used), and an extra 1/2 hp motor. I plan on taking it completely apart so I can clean and give it a fresh coat of paint. I think I will also replace the bearings while I have it apart. Here are some pictures of...

Read this entry »


View Chefshep's profile

Woodshop On A Budget #4: Craigslist takes a "turn" in a direction for new tool acquisition ideas!!!

03-11-2011 07:28 AM by Chefshep | 7 comments »

So, I’m doing my thing… looking on craigslist for the next great tool deal. I usually rummage thru the “For Sale – tools” section for ideas. Then I look thru garage sales which often will have better prices on the same types of tools. One Saturday a few weeks back… I stumble across an add in the garage sale section for a sale at a storage unit business. They’re cutting locks & selling stuff at some units. Other units, the p...

Read this entry »


View BigTiny's profile

basic financial planning #8: know the tax codes

03-11-2011 07:18 AM by BigTiny | 3 comments »

Hi everybody. Here’s an example of how you can make the tax laws work for you for a change, and therefore the importance of knowing them, (or at least knowing someone else who does). Here in Canada, we have what is called a registered retirement savings plan (RRSP). It is a tax deferred way for people to save for their retirements. For this example we will look at someone who has both an RRSP and a mortgage. First, let’s look at some background information. As you ar...

Read this entry »


View ptweedy's profile

are you looking for jig knobs

03-11-2011 07:02 AM by ptweedy | 1 comment »

I found a load of jig knobs at my local home depot today. They were in the clearance section of the outdoor power equipment dept. $1.25 per with a bolt. they are replacement knobs for the lawn mowers and snow blower handles. Go get them. phil

Read this entry »


View BigTiny's profile

A first (I think), a magazine gloat.

03-11-2011 06:57 AM by BigTiny | 5 comments »

Greetings and salutations my fellow LJs. Yesterday I came across a fantastic deal on a couple of hundred wood working magazines, two large boxes full to be exact. They were FREE! A guy had them listed on a local buy/sell site as his wife was bugging him to make some extra room in the house. It pays to be the first one to reply some times. I think these will keep me in reading materials for at LEAST a week. (grin)

Read this entry »


« prev 1 ... 3078 3079 3080 3081 3082 3083 3084 ... 5086 next »
50857 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com