LumberJocks

blockhead's Favorites

  • Advertise with us
View degoose's profile

Open weave Lazy Larry #1: Ripping the stock.

07-14-2011 11:28 AM by degoose | 12 comments »

I am about to make an open weave Lazy Larry…similar to this one. I have ripped some Tasmanian Blackwood into the required strips….. these are just over 600 mm long and 50 mm by 20 mm For our American cousins… 2 feet long and 2 inch by 3/4 inch.. Tomorrow I will be ripping some thin stripes of Huon Pine and Tasmanian Blackwood to make the accents… Strips will be only 3 mm thick [ 1/8 inch] The background will be Huon Pine….. cut into 50 mm squares̷...

Read this entry »


View woodshaver's profile

You've got to see this mirror finish on soft pine!!!

09-08-2012 10:24 PM by woodshaver | 34 comments »

I was putting a finish on a headboard I was working on and just out of the blue I thought what if I rubbed some Salad bowl finish (bees wax and mineral oil) on some raw sanded pine and then let it dry and spray it with lacquer. My common sense told me the lacquer would fish eye or bead up and it was a dumb idea. I always use sanding sealer under Lacquer! Well I did it anyway just to see what would happen! I did all this by hand…..no power buffing at all. I sanded to 400, stained ...

Read this entry »


View Mary Anne's profile

How to make a Wild 'n' Crazy two-tone board

09-27-2010 10:09 PM by Mary Anne | 33 comments »

Sometimes the finished project looks harder to make than it really is. By request, here is a quick tutorial on making a two-tone pattern board. All you need is a bandsaw… or maybe a scroll saw. Start with two boards of contrasting woods squared and surfaced on all sides. ——Use double-sided tape to align and stack them. (carpet tape works great) ——- Cut random curvy lines through both pieces on the bandsaw. This was my first test of the Carter S...

Read this entry »


View SPalm's profile

Double Tumble Cutting Board

05-31-2011 03:11 AM by SPalm | 38 comments »

Or maybe I should call it Two and a Half Steps. Anyway, I cannot believe that I am building another one of these, but heck, they are so much fun. This is a continuing saga of endgrain geometric boards using three contrasting woods. A light color, medium color, and dark wood selection are jointed and planed to the same thickness. I started by tilting the blade to 60 degrees and ripping an edge on all three boards. I then moved the blade over about an inch and ripped again creating a sma...

Read this entry »


View Filinvested's profile

Scraps to Beads

10-16-2010 01:13 PM by Filinvested | 20 comments »

I’ll try to explain how I did this project:http://lumberjocks.com/projects/38288 1. I take a cutoffs, which just can’t to waste 2. Cut them into small pieces, not necessarily cubic: 3. Disks we need: 40, 120, 320 sand paper and wool disk 4. A tin and PVC stripes for soundproofing: 5. My driil. It can work for hours at speed ‘C/D’ (i have been told it could be problem for drills). 6. An IKEA stool and milled groove in it for the tin. 7. The...

Read this entry »


View poroskywood's profile

Drunken Cutting Boards #2: Smooth Flowing Drunken Checker board

09-21-2009 03:49 AM by poroskywood | 15 comments »

So having read part #1 I’ll complete the second variation of the Drunken checker board pattern. The process is basically the same except for one critical part and is as follows. Start again by taping two blanks together. This time In stead of making opposing S cuts I’ll follow the S pattern with each cut. (I get a little sloppy, but it works out OK). Follow the Part #1 procedure. CRITICAL PART! This step creates the difference between the pattern in part one ...

Read this entry »


View Sinister's profile

Cutting board build blog.

04-12-2010 04:10 PM by Sinister | 30 comments »

I recently uploaded pictures of a cutting board (http://lumberjocks.com/projects/30543) and several fellow LJs asked me to show how it was put together. Subsequently, Patron quickly deduced the process and wrote a nice blog showing the step by step process for how to achieve the pattern. I encourage anyone who is interested to take a look because he has some nice pictures outlining the process. http://lumberjocks.com/patron/blog/15074. I thought I would add a short amendment to his blog de...

Read this entry »


View Bob Simmons's profile

Bandsaw Resaw Method

01-15-2013 07:05 PM by Bob Simmons | 17 comments »

This is a bandsaw resaw method that I much prefer over the traditional method of resawing. In the following article I share the advantages of this resawing method. How to Cut Great Veneer The Apprentice and The Journeyman ...Learn more, experience more!

Read this entry »


View patron's profile

dodoe tutoria from a PM

03-31-2012 05:52 PM by patron | 23 comments »

i got a PM yesterday from an LJ’erhttp://lumberjocks.com/Doeasking about a pattern i used on a gift box to schummiehttp://lumberjocks.com/Schummie and as my server is punishing me again for talking with you all(it takes me 20 min to get on LJ’s now)i sent (well tried to) an e-mail with pictures to doe(don’t you know it won’t send)so i thought to do it here as i can load the pics one by one anywayand maybe some others might get some ideas from it_ doe sorry...

Read this entry »


View Alin Dobra's profile

Killer Finish on Cherry (and other woods)

12-21-2010 03:34 AM by Alin Dobra | 19 comments »

Some people asked how did I get the deep, nice finish on my latest cherry projects. Some of you might know the answer: potassium dichromate. Since the information I see on the web about the use of this “magic substance” is inconsistent, I’ll try to give you my point of view and experience. WARNING: I am only offering my opinion without any implicit or explicit liability or fitness to a particular purpose. Use this advice at your own risk; I do not assume any responsibil...

Read this entry »


1 2 3 next »
22 entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase