| This blog is written by bayspt | 12 entries so far |
-
Welding band saw blades
I’ve been trying my hand at welding my own band saw blades. Check it out on my blog at The...
-
Marking Gauge Posse
A new post at the Red Dirt Wood Shop. I cover my short but diverse history with marking gaug...
-
router plane #3: Part the Last
Last part of the router plane series over at the Red Dirt Wood Shop. Assembly video and some vid...
-
router plane #2: ought oh
part 2 and 3 of the router plane series over at the Red Dirt Wood Shop. In this post we run into...
-
router plane #1: the begining
In the process of makeing a router plane. Check it out on my blog at the Red Dirt Wood Shop.
-
New blog
I’ve started a blog called the Red Dirt Wood Shop. I hope to fill it with all kinds of goo...
-
Tool box for the tool box #3: Tool Tray
So after the previous attempt I decided to lay off a day and make the tool tray. I wanted to thr...
-
Tool box for the tool box #2: Prototype # 2
Finally got a table saw and thickness planer, and had to use them. Spent one whole day one assem...
-
Tool box for the tool box #1: Intro and Prototype
Since my first attempt at this blog seems to have been lost here we go again.A friend of mine saw...
-
First real project ever
Well, ladies and gents, I just finished my first real project, ever. I built a plywood box once ...
-
Wish I had a chain saw
Well on my way from Sao Paulo to Campinas, Brazil, I thought I would pause to take this pic for e...
-
To dream a dream
Brand new to the wonderful world of wood working (well almost), and thirsting for knowledge, I tu...
