Tool box for the tool box #3: Tool Tray
So after the previous attempt I decided to lay off a day and make the tool tray. I wanted to throw in a few pics of my new tools too. Got these two for free. (if you don”t count the many nights spent away from my family to get enough Holiday Inn points for $800 at Lowe’s) This was my first attempt at box joints, and my dado set for the TS cost all of $40. Flat bottomed they are not, but I was ok with them all the same. Took a lot of setup with the jig, but it worked beautiful once it was dead on. Instead of moving the fence when I routed the dadoes for the ply bottom, I used the planer and a piece of scrap to make a stand off strip. Worked like a charm. Used a piece of ...
