LumberJocks

End Table, out of Ash #10: Time for a PIP

  • Advertise with us
Blog entry by bandit571 posted 12-04-2018 06:05 PM 530 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 9: Glued up, and assembled Part 10 of End Table, out of Ash series no next part

Didn’t like the gaposis around the plywood panels…had some thin strips of Ash…was just enough to cover the worst offenders..made a flat molding all the way around…clamps and glue…no nails

Let this sit awhile….did a bit of mixing…made a few stain samples for the Boss to look at.
.
Skinny Oak strip has a Witch’s Brew…Boss liked it…

Later, after the glue had dried..clamps came back off, everything sanded to 180 grit…Applied two coats of the Brew, wiped down the excess…allow it to dry…
Hauled the table upstairs, for the Boss to see it..
Time for the PIP..

Side view..

From the one end….

And..the old Pallet wood table it will be replacing

As that 25+yr old top was getting tired..

Table was made from the Oak runners of a couple pallets…about the second season of The New Yankee Workshop.

Project still needs a coat or two of clear gloss varnish….and then get posted as a Project…

Thanks for following along!

-- A Planer? I'M the planer, this is what I use



2 comments so far

View lightcs1776's profile

lightcs1776

4234 posts in 1857 days


#1 posted 12-04-2018 06:21 PM

Great progress. Looks good.

-- Chris ** If there must be trouble, let it be in my day, that my child may have peace. — Tom Paine **

View socrbent's profile

socrbent

692 posts in 2472 days


#2 posted 12-04-2018 07:14 PM

In the “end” you created a good looking end table. Thanks for taking the time for the photos and blog.

-- socrbent Ohio

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com