LumberJocks

A Box of Fancy Pine #2: Almost assembly time

  • Advertise with us
Blog entry by bandit571 posted 05-08-2018 11:14 PM 272 reads 0 times favorited 2 comments Add to Favorites Watch
« Part 1: Start up Part 2 of A Box of Fancy Pine series Part 3: Moldings from scratch? »

Ok, plan was to have a divider in the middle of the box…so, mark out for a dado to be milled..

Then more work with the backsaw….

Then a chisel to clean it out…..

Hand plane to smooth the divider up….was a tad rough from the bandsaw…and you can see the planning stop.

Then, this is where the cussing began in earnest….Kept trying to dry fit all the parts at once….got fed up, and then just spread the glue, added the clamps, and a couple cauls…..Grrrrrr.

To “calm down” from all that noise….tried to size the parts for a tray..

Work in progress….closed shop for the night…

And let this mess sit a day or two.

These cutters are to make a fancy molding, for around the bottom of the box.

That will be in the next episode.
Stay tuned…Moldings….Tray building, and much more..

-- A Planer? I'M the planer, this is what I use



2 comments so far

View Mike_in_STL's profile

Mike_in_STL

643 posts in 529 days


#1 posted 05-08-2018 11:53 PM

Looking good bandit. I’d like to be a fly on the wall when the grumbling starts, just out of the way from a swatter.

-- Sawdust makes me whole --Mike in STL

View bandit571's profile

bandit571

19969 posts in 2678 days


#2 posted 05-09-2018 01:54 AM

Don’t even need to be in the shop….the Boss could hear me right through the floor, while she was watching tv….must have been using the old RSM’s Parade Ground Voice….

-- A Planer? I'M the planer, this is what I use

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com