LumberJocks

Standing Desk of Cherry #1: Start up

  • Advertise with us
Blog entry by bandit571 posted 06-29-2017 12:08 AM 669 reads 0 times favorited 0 comments Add to Favorites Watch
no previous part Part 1 of Standing Desk of Cherry series Part 2: Leg work.. »

Well ths may be a long blog, or just a teaser…
Brought home a stack of “Good” lumber from a recent Road Trip. Helpped clean out a friend’s scrap pile..

Thinking this stack is mostly Cherry,

Well, there was a 6/4 slab in there, somewhere. Did a bit of resaw work on the bandsaw..

Blade wanted to wander around a bit,,we have ways..

In fact, I used three planes.

Each set a little differently. Jumbo Jack was set very coarse, the 0-7 not so much, then a clean up with the No.8…

Legs were set aside, as I resawed some aprons and stretchers. Needed the planes to remove the saw marks and joint the edges..

Great, now we have figure.

Well, this morning, I decided the front and bak aprons were too long. Cut them to 26” in length. Laid out for some tenons…

As I do tenons first. Bandsaw again..

Blade was having issues, was trying to burn it’s way along..

Time for some “Details”

Set up the Stanley 45 with a #23 bead cutter…

As I have these to do…

Stretchers got beads all four corners, aprons get a single one on the outer, bottom edge.

I also cleaned the “show” face of the aprons….I set the Stanley 45 aside until I need it ..later.

Well, getting a bit long-winded, and time for Lunch…..stay tuned, next episode is coming up….

-- A Planer? I'M the planer, this is what I use



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com