| This blog is written by ashgrove | 15 entries so far |
-
16' Gentlemans Runabout #15: Front Deck
Installed king plank.Completed planks for front deck.Fabricated carlin for engine hatch. ...
-
16' Gentlemans Runabout #14: Rear Deck
Starting to install planking. Installing rear deck. Rear deck complete.
-
16' Gentlemans Runabout #13: Interior Stain
Installed battens. Created a template of the engine stringer and now have to cut it out of a p...
-
16' Gentlemans Runabout #12: Top Side Planks
Installed shear planks. Clamped the layout batten on plank. Cut curves for first top si...
-
16' Gentlemans Runabout #11: Rolling the Boat
New crib with hockey socks as liners.Flipped over with mounts installed. Stripped ...
-
16' Gentlemans Runabout #10: Bottom Paint
Laminated another layer on to the transom.Set water line with laser then taped off, ready for pai...
-
16' Gentlemans Runabout #9: Fairing
Planks are now all installed and have started to fair the hull. When compl...
-
16' Gentlemans Runabout #8: Side Planks
INSTALLING SIDE PLANKS LAST PLANK TO BE INSTALLED, READY TO START SANDING.WE WILL ...
-
16' Gentlemans Runabout #7: Side Planking
I used a laser to establish the waterline and then scaled the drawings to layout the side planks....
-
16' Gentlemans Runabout #6: Picture of Overall Progress
Here is a picture of the progress made so far.
-
16' Gentlemans Runabout #5: Still Planking
Finally back to work, again. Will try and complete for this spring, ha-ha-ha. ...
-
16' Gentlemans Runabout #4: Planking
Finally back to work! Installing more planks. Stay tuned f...
-
16' Gentlemans Runabout #3: Planking
Transom planks are put in place with silicon bronze screws.First plank is cut. Plank is fa...
-
16' Gentlemans Runabout #2: Transoms
We used oak door skins for templates to install the planks.16’ african mahagony planks arri...
-
16' Gentlemans Runabout #1: Stations
We are building from scratch a 16’ Hacker Gentlemans Runabout in our garage. The process st...
