Joined
·
124 Posts
I made a simple Drawing
# 1 Take a piece 1×4x25 with it 4 inches on both ends
# 1 Take a piece 1×4x25 with it 4 inches on both ends
- 2 Set the Fence to where the outside of the blade is flush with outside of the board taking
off a blade thickness of stock cut about 8 inches stop - 3 Now Flip the board end for end lock or tape to stop from moving take the piece you want to Join
Starting at the cut you made in the board using the flat at the blade and the part of the board
that you left uncut as a guide will be like a joiner just as good
See Scan View attachment 633036