Lathe vs. Idiot

  • Advertise with us
Blog entry by ars posted 1117 days ago 1375 reads 0 times favorited 21 comments Add to Favorites Watch

This made me cringe, so I felt like sharing it. BTW I didn’t make this video.

21 comments so far

View Drew's profile


46 posts in 1188 days

#1 posted 1117 days ago

Where was the shop teacher? Cripes

-- If A equals success, then the formula is, A = X + Y + Z, Where X is work, Y is play, And Z is keep your mouth shut." -Albert Einstein.

View Dennisgrosen's profile


10850 posts in 1615 days

#2 posted 1117 days ago

wauw if he didn´t breake that foot he is luckyer than the law allowed him to bee
stupid people is everywere


View Rick's profile


5865 posts in 1533 days

#3 posted 1117 days ago

Really! Really STUPID!!! He deserves what ever happened to him!

-- The Difference Between A BEER And Your OPINION Is, I Asked For The BEER!

View Greedo's profile


465 posts in 1461 days

#4 posted 1117 days ago

well what did they think was gonna happen? reminds me not to get too close to the PTO of our tractors, those will mangle you without blinking

View saddletramp's profile


994 posts in 1139 days

#5 posted 1117 days ago

Doctors can cure a lot of different things these days but there is just no cure for stupid!

-- ♫♪♪♫♫ Saddletramp, saddletramp, I'm as free as the breeze and I ride where I please, saddletramp ♪♪♪♫♪ ...... Bob W....NW Michigan (Traverse City area)

View Grant Davis's profile

Grant Davis

611 posts in 2409 days

#6 posted 1117 days ago

What a DUMB ARSE…....honestly, I hope he was not injured but a big part of me says he got what he deserved.

-- Grant...."GO BUCKEYES"

View Gregn's profile


1642 posts in 1484 days

#7 posted 1117 days ago

you can’t fix stupid (Ron White)

-- I don't make mistakes, I have great learning lessons, Greg

View CAT's profile


15 posts in 1361 days

#8 posted 1117 days ago

darwins law at its best

View twokidsnosleep's profile


1059 posts in 1474 days

#9 posted 1117 days ago

Movies like Jackass promote this kind of ridiculous behavior…..
wrecking stuff, putting others in danger and just stupid acts

-- Scott "Some days you are the big dog, some days you are the fire hydrant"

View Moron's profile


4666 posts in 2394 days

#10 posted 1117 days ago

and the lathe won. ............... unbelievable

watched a guy with a scarf work on a lathe….............he almost died.

%$#@# idiot

-- "Good artists borrow, great artists steal”…..Picasso

View Mark Shymanski's profile

Mark Shymanski

4746 posts in 2213 days

#11 posted 1117 days ago

I saw something as equally stupid but not quite as dangerous. The ice on the roads is melting here, there are deep ruts and water everywhere. If you try to turn out of the ruts it may stop your car or if you have enough momentum you can hop out of the rut.

Last night I watched a fellow sitting at the corner of our bay spinning his wheels, reving his engine and basically displaying the behaviour of a very inexperienced or stupid stuck driver. He had his wheels cranked hard right effectively wedging his vehicle in. After watching him use his cell phone presumeably to phone a tow truck, I wandered out there. Here leaned out of his door (in his defense on this front he was in a huge puddle, and stated “I’m never gonna get out of here” . I told him to straighten his wheels and drive out…moments later he was on his way. I hope he cancelled the tow truck LOL!

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View nobuckle's profile


1120 posts in 1261 days

#12 posted 1117 days ago

I don’t know if there are enough explitives in the all the languages of the world to describe that kid. All I know is that I would feel like kicking that kids ass as soon as I could get to my feet. That kind of stupity angers me in the worse way. At first I thought the one kid was going to leave the key in the chuck, that would be equally as bad.

-- Doug - Make an effort to live by the slogan "We try harder"

View Mark Shymanski's profile

Mark Shymanski

4746 posts in 2213 days

#13 posted 1117 days ago

I wonder what the liability is for the person who turned on the power?

-- "Checking for square? What madness is this! The cabinet is square because I will it to be so!" Jeremy Greiner LJ Topic#20953 2011 Feb 2

View dbray45's profile


2468 posts in 1277 days

#14 posted 1117 days ago

Having worked with engine lathes, this hurts on so many levels. This is why many schools are taking shop out of the schools.

It is obvious that the kid has no idea of what this equipment is capable. He has an idea now. If he didn’t loose his foot he is seriously blessed.

-- David in Damascus, MD

View lilredweldingrod's profile


2492 posts in 1607 days

#15 posted 1116 days ago

It always helps to just a little smarted than the piece of iron.

showing 1 through 15 of 21 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase