For this diy piece, I wanted to solve the problem I’m facing: I have a growing pedal collection, but after using some of the pre-assembled products on the market for a while I decided they weren’t quite cutting it. I wanted something closer to a custom pedalboard—minus the elevated price tag. After scoping out the range of custom options offered by various companies, I decided to make something with all the features I wanted. It’s a bit more involved than duct-taping everything to an IKEA shelf, but it’s definitely not as involved as some of the space-age control centers on the market. I was careful to keep costs as low as possible, though. in fact, I was able to keep the price around $100.
A couple of notes about things we’re not covering here: I won’t go into the theory of wiring up your board (effect order, switching options, etc.)—that’s a whole other topic. Here we’re covering the basics of getting a signal and power to and from your board. Also, though most players need a pedalboard case because they drag their boards all over the place, we’ll refer you to the fine folks at blackbirdpedalboards.com, stompin-ground. com, nycpedalboards.com and other outlets with a multitude of sizes, options, and materials for you to choose from once you’ve decided on the final size and shape of your board.
All right—let’s get to it!
Lay out your pedals on the floor in ideal performing position and use a tape measure to determine what size of board will fit them. I decided on 24” x 16”. I wanted my board to have an angled surface so I can comfortably reach two rows of pedals, so we’ll also make the surface angle from 4” high in back down to 1 1/2” high along the front edge. This will also let me mount a power supply underneath.