LumberJocks

heart box

  • Advertise with us
Blog entry by alohasteve posted 02-24-2012 10:10 PM 663 reads 0 times favorited 1 comment Add to Favorites Watch

I used a forstner bit for most of the cut out of the bottom of the box. I used a mortise to get the v at the bottom of the heart, used a dremmel for clean up had to fill the center holes from the forstner bit so flocking was nessary to cover that up I dont have a plunge router and im not great with free hand stuff as you can tell by the edge of the maple. If you haven’t been to Baddogburls.com web site i would recomend it, I’m lucky because he’s only about 1/2 hour from me thanks for the comments so far this sight is great!!!!!!!!

-- steve's what not shop



1 comment so far

View robert triplett's profile

robert triplett

1481 posts in 1794 days


#1 posted 02-24-2012 11:53 PM

Thanks for the info. That was a lot of material to hog out with the forstner bit. you did a good job.

-- Robert, so much inspiration here, and so little time!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase