| This blog is written by Jaeyoel Park | 11 entries so far |
-
Making Sofa table by handtools #6: Butterfly key joint
This is the Korean Chamjook. I used the straight grain section. cut the center. and c...
-
Making Sofa table by handtools #5: Tapered sliding dovetail
I made temporary guide for saw and chisel. the angle is 1:8. marked… sawed inside p...
-
Making Sofa table by handtools #4: Side panels / Restoring defects
I put a symbol of bat on side panel using hand scroll saw. as I told in my previous posting, It ...
-
Making Sofa table by handtools #3: Making stretcher
making sequence : 1.dimension 2.make dadoes 3.saw curvature I cut some boards for the rest par...
-
Making Sofa table by handtools #2: Joining boards for the top
I did fore planing three boards with Veritas Scrub & BUS (tooth blade) The tooth blade...
-
Making Sofa table by handtools #1: CAD
1. Symbol of “BAT”On the side panels, there is the Korean-traditional symbol.Peop...
-
Transformable and sectional furniture for kid
If you don’t have your child yet,Or… your grandchild would be delivered soon,Let me p...
-
Making Bed for my own #4: Bangdoo-sanji and center supporter
”Bangdoo-sanji” in Korean is almost similar with ”tusk-tenon” in English....
-
Making Bed for my own #3: Side rails
select… making groove with dado blade…- depth : 5 mm ( 1 inch = 25.4 mm )- wi...
-
Making Bed for my own #2: Head and foot boards
I guess that several photos will be better than my poor English T.T marking mortises for the d...
-
Making Bed for my own #1: CADed by Sketchup
Hi, Everyone :) As I told in my profile, I’m not good at speaking or writing English.so....
