Assembly Table #4: All done
Well, it’s not as pretty as some, and not as elaborate either. But it will serve me well. Plus, an added couple of bonuses… First, open storage: And, it works well as an outfeeder table: Thanks for looking. Cheers!
| This blog is written by airfieldman | 9 entries so far |
Latest Entry
Older Entries
-
Assembly Table #3: Legs are done
Original plans (located in my head) were to have a removable top. The concept was, since I have ...
-
Assembly Table #2: The Top is Done.
Well, the top is done. I have to say, MDF is VERY heavy. I had heard that before, but didn’t re...
-
Assembly Table #1: The Begining
I got a lot of work done today (YAH!!). Having been ill for the past couple of weeks, I have sta...
-
The DTs
OK Jocks, I need your sage advice…I’m going through some SERIOUS withdrawals. I̵...
-
Time
I was reading OKALBERT’s entry “My Workshop #12: We’re making progress on the w...
-
Sawdust Is Our Friend!
20 years ago, or so, I started something that I had no idea would be such a life changing event. ...
-
Clamps
Ok, I’ve heard “you can never have too many clamps” and I’ve learned you ...
-
Stacked Dado, or Router Bit
Ok, I’m new. I admit it. No shame, right? Here’s my problem…I’m buildi...
By subscribing to the RSS feed you will be notified when new entries are posted on this blog.
