This is my first attempt at writing the blog. I’m testing how to present, the resolution of images, etc … I promise complete with photos and text illuminating.
This is a Beta version!
The construction of my Jig circular aims to make perfect cuts to facilitate the connection between the parts from cutting. The lower clamping system allows for maximum space on top. It will be used with larger radii. The pivot bracket can be rotated beyond the limits of the table, enabling greater capabilities in radius.
The pivot bracket can be replaced easily by larger pivot bracket.
It also aims to be used for as many machines as possible, including:
- Band saw,
- Router ,
- and Sander .
I used as a point of rotation, steel rod of 12 mm, and as support for, a rotating bearing.
-- Aflixa - Granja - Portugal
2 comments so far
Bob #2
home | projects | blog
3808 posts in 2187 days
#1 posted 1275 days ago
Bom trabalho na rapaziada.
Não vejo como você pode usá-lo para 3 máquinas differnt.
Por favor, explique.
===================
Nice job on the jig.
I do not see how you can use it for 3 differnt machines.
Please explain.
-- A mind, like a home, is furnished by its owner
aflixa
home | projects | blog
59 posts in 1341 days
#2 posted 1275 days ago
For the band saw is perfect.
For the router is almost.
Although it is possible to fix it in the router table is a bit off center. At the bottom is necessary to make an adjustable stop, which serves the two machines. The lifting bar can be the same.
In the case of sander, will see. The problem is the base for fixing to be very small.
-- Aflixa - Granja - Portugal
Have your say...