Well its getting mighty close to Christmas and I have one big project left . . . a jewelry armoire for DW.
I started by planing down a bunch of 15\16 Poplar to 3/4". I'm not really sure if I have enough, but if I don't I can run to Home Depot and pick up some D4S. I have to joint the boards before using, but that will be another day.
Last night I developed the plan for the project. This is how I plan most of my projects: grab a piece of paper and a pen or pencil, sit down at the kitchen table with a cup of tea and start sketching.
Once I get the below built . . . then I will continue with the plan. Or maybe not . . . I might just wing it.
Well its getting mighty close to Christmas and I have one big project left . . . a jewelry armoire for DW.
I started by planing down a bunch of 15\16 Poplar to 3/4". I'm not really sure if I have enough, but if I don't I can run to Home Depot and pick up some D4S. I have to joint the boards before using, but that will be another day.
Last night I developed the plan for the project. This is how I plan most of my projects: grab a piece of paper and a pen or pencil, sit down at the kitchen table with a cup of tea and start sketching.
Once I get the below built . . . then I will continue with the plan. Or maybe not . . . I might just wing it.
My Mom and Dad always did their projects with this type of plan, and it worked for them for 40+ years. One day Jenn handed a similar plan and I thought "The wheel continues to turn". I hope she keeps giving them to me for at least another 40 years! I wish you success with your project!
Well its getting mighty close to Christmas and I have one big project left . . . a jewelry armoire for DW.
I started by planing down a bunch of 15\16 Poplar to 3/4". I'm not really sure if I have enough, but if I don't I can run to Home Depot and pick up some D4S. I have to joint the boards before using, but that will be another day.
Last night I developed the plan for the project. This is how I plan most of my projects: grab a piece of paper and a pen or pencil, sit down at the kitchen table with a cup of tea and start sketching.
Once I get the below built . . . then I will continue with the plan. Or maybe not . . . I might just wing it.
Well its getting mighty close to Christmas and I have one big project left . . . a jewelry armoire for DW.
I started by planing down a bunch of 15\16 Poplar to 3/4". I'm not really sure if I have enough, but if I don't I can run to Home Depot and pick up some D4S. I have to joint the boards before using, but that will be another day.
Last night I developed the plan for the project. This is how I plan most of my projects: grab a piece of paper and a pen or pencil, sit down at the kitchen table with a cup of tea and start sketching.
Once I get the below built . . . then I will continue with the plan. Or maybe not . . . I might just wing it.
OK Great Box! And If you don't hate me. You have inspired me for something I have been thinking about. A new roll around tool box for my galoot stuff. Planes and saws can be hung on the sides inside the doors gand the rest in the drawers with the top being used as a aux stand or other wise. Maybe with some dog holes just in case. Should be interesting
I decided to video blog this section. After I did the jointing and did a few calculations I realized that I need more wood. I think I'm going to pick some D4S at Home Depot as planing and jointing takes a fair amount of time.
There is no sound the first 10-15 seconds . . . so don't turn your volume up REALLY high. Just be patient.
Nice trick using the binder dividers for shims to remove material. Da wife and I went through our three kids' rooms cleaning this past week. They have all moved out on their own and we shoveled out their leavings. Can you say, Empty Nest? Anyway, my pack-rat kids left behind lots of junk, including binders , each containing several of those dividers. Never occurred to me they would be good for any woodworking purpose.
Great job of of jointing, BTW. I, too, have no jointer, so I am relying on my router as well. Thanks for sharing.
Ps. Was that Foghorn Leghorn I heard in the background?
Merry Christmas from me and mine to you and yours.
Yesterday I went to Home Depot to pick up some poplar ready for building. Wow . . . was it ever expensive. A 5" x 8' board ¾" thick was $18.00 . . . that's about $6.00 bf. I also picked up some ¼" board for the drawer bottoms.
Yesterday I went to Home Depot to pick up some poplar ready for building. Wow . . . was it ever expensive. A 5" x 8' board ¾" thick was $18.00 . . . that's about $6.00 bf. I also picked up some ¼" board for the drawer bottoms.
I spent the last couple of days taking additional measurements, cutting boards and assembling the main section of the amoire. I am using 1 1/4" countersunk gyprock screws for the construction.
I have two videos . . . but they are still in the editing stage. However here are a few pics.
I spent the last couple of days taking additional measurements, cutting boards and assembling the main section of the amoire. I am using 1 1/4" countersunk gyprock screws for the construction.
I have two videos . . . but they are still in the editing stage. However here are a few pics.
How is it that something so simple can cause so much grief?
I had it all worked out in my head and everything was going fine until I made one stupid mistake . . . actually I made the same mistake 16 times. I was not happy when I discovered what I did . . . actually DW saw it first and I'm glad she did as I would have had to do a whole lot of deconstruction to fix the errors if she was not there to pick up on it. Watch the video.
Well I finally have the drawers installed. There is no hardware, and they are a little "un-smooth" in their operation, but they are built and they do work. I have some fine tuning to do . . . but that will happen later.
The plugs Kreg supplies are a slightly looser fit, not requiring hammering, so that the ends don't smash. They do, however, have a unique angle on the end that goes into the hole, which I have alway had to cut off to fit properly. Their plugs are meant to be just proud of the surface so that they can be sanded flush. I believe the paintable plugs are basswood.
I recently had the opportunity to inspect a local cabinetmaker's cabinets prior to installation. He used drywall screw instead of the pocket hole screws, and about 20% of them were twisted off in the hole. I would suggest using only Kreg or McFeely's pocket hole screws, as they are heat treated for the torsional properties required in this application.
I have been following your progress, and have learned a thing or two.
You know that great feeling that you get when you are coming to the end of a project and you can pretty well see the finish line? Well I have that feeling after today. Take a look.
You're hopes have been realized. I like it. (That would be in response to you saying "I hope you like it").
A very attractive unit, and a slick series of videos.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
LumberJocks Woodworking Forum
2.5M posts
96K members
Since 2006
A forum community dedicated to professional woodworkers and enthusiasts. Come join the discussion about shop safety, wood, carpentry, lumber, finishing, tools, machinery, woodworking related topics, styles, scales, reviews, accessories, classifieds, and more!