LumberJocks

My experience with tablesaws

  • Advertise with us
This blog is written by Woodsurgin | 1 entry so far

Latest Entry

My views on table and cabinet saws.

745 days ago by Woodsurgin | 5 comments »

I have read many of the comments on tablesaws/cabinet saws. I still am using my ancient Craftsman that I bought from my father. I have upgraded the pulleys to give a higher blade speed along with replacing the belt with the link belt.I enjoy much smoother operation and cutting power. I use a Forrest WWII thin kerf blade, which works well. I found a Delta T2 fence on the bargain table at Woodcraft, and fitted it to my saw. I enjoy the ability to read from the tape. I have set the fence at 1/32 runout at the rear. This appears to help in ripping. I installed a switch on the left side with the paddle shutoff. Once the motor wouldn’t run. A friend showed me that I needed to blow out the...

Read this entry »


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase