Woodbutchery's Blog

  • Advertise with us
This blog is written by Woodbutchery | 38 entries so far

Latest Entry

This week in the shop: sanding caddy

08-06-2017 05:32 PM by Woodbutchery | 1 comment »

So, a while back I tried to make a little sandpaper caddy for my disk paper which turned out to be a hideous lop-sided affair that seemed more an M.C. Escher exercise than a wood-working project. Needless to say, THAT was a bit of a down moment, but it all harked back to practicing with purpose. So I looked around, found a design I liked, used a better quality wood, and measured things a lot to make sure I was going to like the final product. 3/4 ” sides and middle divider between the 5 inch disks and the regular sandpaper sheets, and 3/8” for the top and bottom. I’ll probably put some pictures up in the project section later, but then again, I might not. Two things ...

Read this entry »

Older Entries

View all 38 entries »

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics