LumberJocks

Cedar Driveway Gate #2: Purchasing and Preparing the Stock

  • Advertise with us
Blog entry by WoodHoarder posted 05-04-2016 04:33 AM 575 reads 0 times favorited 0 comments Add to Favorites Watch
« Part 1: Design and Preparation Part 2 of Cedar Driveway Gate series Part 3: Laminating, Laminating, Laminating »

A trip to the Lumber store took about three hours longer than expected. My wife and I needed to sift through nearly all the cedar in stock to get some that were workable. Almost wanted to give up and go to clear cedar or redwood. None-the-less, we prevailed and took the rough stock home.

To get the 2-1/8 thickness, I need to laminate a piece of 1×6 stock to a piece of 2×6 stock. I tried to select the pieces to compliment each other.

I cut all the stock to rough dimensions on my newly built miter station.

-- Christ was a carpenter...a fact that humbles and inspires me.



0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com