Biscuit Jointer Spline Jig Build

  • Advertise with us
Blog entry by WoodCrafts67 posted 06-01-2016 03:50 PM 576 reads 2 times favorited 2 comments Add to Favorites Watch

This is a Jig I made Because I needed something to hold my Jointer steady as I used it to make spline cuts into my wooden boxes and picture frames, I have been using the biscuit jointer for this process for a while now. This is why I came up with this and it works very well and keeps the boxes/Frames very stable during the cutting process. I use two types of clamps. One for the oblong type boxes and The beak type clamp in for complete square type boxes. Below is the link to my youtube Channel as you will see more about it there..

Thank you for taking the time to read this. I Appreciate it… Take care :) Terry WoodCrafts 67

-- WoodCrafts 67

2 comments so far

View nkawtg's profile


202 posts in 675 days

#1 posted 06-01-2016 05:01 PM

I would have never thought to use my biscuit jointer for spline cuts.
Very clever solution.

View WoodCrafts67's profile


23 posts in 148 days

#2 posted 06-01-2016 05:51 PM

Thank you Nkawtg
I have been using this jig for the last 3 days and I love it and a good time saver to. Thank you for commenting I Appreciate it.. :)

-- WoodCrafts 67

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics