| This blog is written by Wes Grimes | 10 entries so far |
-
Fiddle Case #1: I am tired of being out "blinged" at the fiddle jams
Among my hobbies is playing fiddle at acoustic jams. What I have noticed when a bunch of fiddl...
-
Computer Keyboard #2: Major woodwork complete
I finished all the holes and routed out the back cavity of the keyboard. I am working in sanding ...
-
Teardrop Travel Trailer #1: Buying an RV is not for this Lumber Jock, I will build one!
How about a retro teardrop travel trailer big enough for a queen size bed, AC, TV and exterior ki...
-
Computer Keyboard #1: Over my head...
I was inspired by the Steampunk keyboards where people have stripped the keys off of vintage type...
-
Digital Clock #6: Finished!
I added this to my ‘Projects’ now that it is complete. Here is the Arduino cod...
-
Digital Clock #5: Wiring complete. We have lights!
I can not figure out how to take a picture of 100 bright LEDs…It is much more readable in p...
-
Digital Clock #4: Chips ahoy!
Added the microchips (1) 74hc595 and (1) uln2003a per digit with 220ohm resistors on every LED. T...
-
Digital Clock #3: Digital Clock LEDs finished and mounted
About 330 wire ends stripped and soldered: Rice paper sandwiched between two layers of...
-
Digital Clock #2: Digital Clock LEDs
Making progress on the digital clock’s leds Still soldering… O...
-
Digital Clock #1: A Clockwork Mahogany: Making a digital clock
I don’t know what time it is!!! If only I had a clock!But not just any clock. A four foot l...
