LumberJocks

Addison's Crib #2: Getting sidetracked

  • Advertise with us
Blog entry by Weatherman posted 667 days ago 1235 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 1: Deciding on materials and design Part 2 of Addison's Crib series no next part

So have you ever been working on something, then decide, hey, this would be a lot easier if I had “insert tool here”? Definitely happened to me.

I bought a grizzly polar bear in January for my birthday and had been planning on building on to it. Like many here, I work out of my garage so space is of great importance. For the crib, I knew I would need a router table. I had been using a scrap piece of plywood with the router mounted in it. I figured it was time for an upgrade.

I started with a poplar frame

router frame

Then added a plywood table and a rockler insert. I had some extra t track laying around so I added it too. Last I built a fence that clamps to my table saw fence. The dust collection is ok with the top, but I need to add a box under it for more.

router table

-- Brian



1 comment so far

View derosa's profile

derosa

1536 posts in 1468 days


#1 posted 666 days ago

I’ve been needing to do this really badly, my tablesaw has terrible wings on it that aren’t flat to the cast iron and this has been the solution I’ve thought of. Looks like you’ve done a good job of it.

-- --Rev. Russ in NY-- A posse ad esse

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase