LumberJocks

Building a Moving Fillister Plane

  • Advertise with us
Blog series by Wally331 updated 06-16-2014 01:30 AM 2 parts 18097 reads 12 comments total

Part 1: Precursor and laminating the body

06-12-2014 10:46 PM by Wally331 | 4 comments »

Intro- I’ve been using a lot of wooden planes recently and have really come to enjoy their lightness and the feel of wood sliding on wood. Obviously there are a ton of vintage woodies out there; however, I quite enjoy making my own versions of them. They are a lot cheaper (if you have some time on your hands) and you don’t have to deal with old warped wood and a host of other problems you may encounter. I can’t say I am an expert by any means, I’m simply sharing my...

Read this entry »


Part 2: Boxing, Depth Stop, Fence and even a nicker

06-16-2014 01:30 AM by Wally331 | 8 comments »

Pics will be in a few minutes… Where exactly did I leave off last time…ahh the main body is essentially done, and now all the adjustment features are all that’s left. Boxing The one weakness of cherry for planes is that it’s just a little bit soft. Not much softer then beech, but enough that a harder sole will help over the years. Especially on a fillister or rabbet plane where almost all of the wear is on a corner. I chose bubinga to box it with, because its ...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com