LumberJocks

WWilson's Favorites

  • Advertise with us
View shipwright's profile (online now)

Easy. Elegant Wooden Box Hinge #1: I could kick myself

1125 days ago by shipwright | 58 comments »

A few months ago I spent many many hours trying to perfectly align a set of “box joint hinges” for my project ” A Little Cabinetree” After I finally got them working I installed them on the edges of the MDF sides and doors and then veneered over the whole works. The only good part was that there were enough left over prototype parts that I could make a hinge for my next project from the cast-offs Then this week I was making a tea box for a friend and when...

Read this entry »


View tyka's profile

Combo Drum Sander #3: Surface Sander, cabinet, specs, cost, observations

1205 days ago by tyka | 7 comments »

This is the last of three parts detailing how I made the sander. Part 3 provides details for the surface sander attachment, photos of the final combo sander, specs, dimensions, comments, observations and a cost estimate. I found the sander too heavy to lug around and too high to use on my bench or assembly table. It’s now on a rolling cabinet made with ¾” plywood. The cabinet has two large drawers and storage in the back for the Surface Sanding Table, a place to hang a large push stick on ...

Read this entry »


View GaryK's profile

How I made my Intersected cutting board

1250 days ago by GaryK | 31 comments »

Here is how I made my Intersected cutting board posted here. There seems to be a lot of interest in this board so here is a blog on how I made it. First of all here’s what I planned on making. It’s the top one. After I got both the circles intersected I liked how it looked with the rounded corners so I just added in the “wedge shapes”at the top and bottom and called it done. I think that it makes it very distinctive also. As one person guessed I ...

Read this entry »


View patron's profile (online now)

making a 'bow tie' circle pattern - tutorial

1289 days ago by patron | 42 comments »

my ‘did it my way board’ http://lumberjocks.com/projects/42141 was done like thisthe tangents are the square of the circlethe thickness of the stock is that height of the squarethe width of the stock is the square and the two wingsof the circle combined(for my 1 1/4” bits it was 1”x1 1/2”).cut and mill the stockrun the round edges firstso the flat is still good for the coves later.the fence and the cutter tangent want to be exactso there is no loss in w...

Read this entry »


View BritBoxmaker's profile

The EZ mitre technique

1456 days ago by BritBoxmaker | 72 comments »

Hello all. Well I seem to have whet the appetite a bit so here goes for a ‘novel’ technique for making mitred boxes. Its a bit like making a box out of paper, like they showed you at school, using a ‘net’. Only in 3D, with wood and a tablesaw (not sissors). Well first comes the board Its made from alternating strips of Maple and Rosewood of varying thickness. I won’t bore you with the details on how to make it suffice to say that all the corners must b...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase