LumberJocks

Oak Pub Table #4: Glue ups and sanding are finished

  • Advertise with us
Blog entry by VinnieP posted 09-03-2010 05:25 AM 1290 reads 0 times favorited 1 comment Add to Favorites Watch
« Part 3: Lots to report; Glue up, doweling, tapering, circle cutting... Part 4 of Oak Pub Table series Part 5: Stained - Last Update! »

I am ever so close to staining. All of the gluing and sanding is done as of now. I’m going to give everything a once over to see if there are any more spots that needed sanding. Otherwise, I’m ready to start staining. I am going to stain the top before attaching it.

Here is the post all glued up:

This is a close up of the arms. The groove you see was routed in. The buttons I made previously will help connect the top.

This is how it looks without the top on:

And here it is with the top! It isn’t attached. I just wanted to see what it would look like.

I’m looking forward to this weekend’s staining.



1 comment so far

View Scott Bryan's profile

Scott Bryan

27251 posts in 3282 days


#1 posted 09-03-2010 11:27 AM

Vinnie, the table is looking pretty good. This is the stage which really gets the adrenaline pumping for me because the project’s completion is in sight.

-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com