|View Vest's:||home||workshop||projects (2)||blog (2)||reviews (0)||forum topics (11)||buddies (1)||favorites (1)||activity log|
|02-29-2016 02:21 AM||
Hall and Brown no. 1 12 inch jointer - 3 replies
Trying to find out all I can about a Hall and Brown no.1 12 inch jointer. Have a guy wanting to trade me this for a New Britian chain mortiser I have that was made in 1901. Can anyone tell me what size the blades are on it as far as thickness, width? Where I can buy the blades for it?
|11-09-2015 02:57 AM||
Unisaw goose egg motor cover 1454. - 6 replies
Looking for a Unisaw goose egg motor cover. Have found 2. 1 on Ebay that is plastic but you have to buy it and the dust door together. The other 1 is cast iron and is $250 ( a little out of my budget). I am fine with a plastic one . They did have them on Ebay for $80. Now they don’t. Any help would be very appreciated . Thanks.
|08-31-2015 09:13 PM||
Dust collector ( dust blower) - 13 replies
I have been looking for a bigger dust blower for a while. I say blower because I am able to blow the saw dust strait out the back of my shop. I have a 1hp industrial motor and blower right now. It works fairly well, but tends to not be able to pull all the chips from my planer when planing a lot of wood ( running more than one board at a time th...
|05-12-2015 02:01 AM||
Dust collector - 14 replies
Hey guys needing some help. I am trying to set my entire shop up on a dust collection system. Have run all the duct work and blast gates. I have a Grizzly 2 hp dust collector. Needless to say it can’t handle everything. I am running a 15 inch planner, 6 1/8 jointer, Unisaw, Miter saw , spindle sander, band saw,shaper, and hand sanders on t...
|02-12-2015 11:22 AM||
Grizzly 1021z planer - 0 replies
I have found a decent deal on a Grizzly 1021z planer. Was wondering if anyone had any experience with them? I have tried looking up reviews for this planer but it keeps bringing up a different model. Any info would be appreciated . Thanks
|01-13-2015 04:23 PM||
Woodtec 21 inch planermotor - 5 replies
Wanting to find out where I can get a 5hp motor for a Woodtec 21 inch planer. Found plenty on eBay just don’t know how many rpm’s it needed to be. Also wondering what kind of pully system they have. I have found the Woodtec planer for cheap but needs a motor. The guy said he thought it had a 5hp motor but didn’t know anything e...
|12-14-2014 01:20 PM||
What best to use on walnut hall tree bench. - 11 replies
Was wondering what would be a good finish for a walnut hall tree bench? I have always in the past just stained and used polyurethane . I was looking for something a little better for this project. We have a 3 year old so he is pretty hard on stuff climbing on it. That is why I think the polyurethane isn’t the way to go for this project. An...
|09-13-2014 02:08 AM||
Dewalt frame nailer D51822 - 5 replies
Hey wondering if anyone can tell me what is wrong with my nail gun. It is a Dewalt frame nailer model D51822. It was working fine. Then it went to just blowing air out the nozzle . I have took it a part and looked at all the o rings and wipers. They all look good. I took the trigger out and checked the trigger valve. It all looks good. Any ideas...
|12-28-2013 10:43 PM||
extension tables for Delta drum sander 31-250 - 2 replies
Wondering if anyone can tell me where to get the in feed and out feed extension tables for a Delta 31-250 drum sander. I have tried to look them up . I have seen where they were. When I went to that page they say they no longer have them. Wouldn’t mind buying them used or new. I have looked on ebay. No luck. Any help would be appreciated .
|12-24-2013 04:09 PM||
Finishing a kitchen table. - 2 replies
Wondering if there is any products you can finish a kitchen table with that won’t let heat and water mark the surface? My Grandmother had a wood table growing up that she could put cold drinks and hot plates on and it wouldn’t mark it. I don’t remember what kind of wood it was or what it was finished with. She always said the s...
|12-16-2013 04:47 PM||
Delta drum sander - 22 replies
Can anyone help? I have a Delta 31-250 drum sander my wife bought for me used for Christmas. Ever since I got it a week ago it has been hard to get the feed belt to lift and lower. I have cleaned the gears and oiled the screws. No help though. Last night was using it and went to crank the feed belt up and it just clicked. Knew something had str...