LumberJocks

Vance100's Blog

  • Advertise with us
This blog is written by Vance100 | 5 entries so far

Latest Entry

Hand tool workbench #4: Legs

08-08-2013 02:09 AM by Vance100 | 8 comments »

The legs were a new challenge, especially with hand tools. This process took me 3 days, working a couple hours a day. It was really tough to resist using my miter saw, but I did and learned a lot in the process. Picked up the 2×4’s for the legs. Used the same method to cut these to 36” length. The finished length will be 34”. I planed the mill marks off. Opps! I somehow cut one leg shorter than rest. Good thing I gave myself some room. I did the glue zig-zag and clamped all the legs together. I squared the legs up. I made a knife wall all the way around with a knife and chisel. This helps guide the saw. Next I planed ...

Read this entry »

Older Entries


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com