A quickie post I didn’t mention making the red Oak pieces to latch behind the lower lip of the cabinet before. These are just big enough to fit below the lower shelf . The article in the magazine mentions making these the full length to s...
|View Tugboater78's:||home||workshop||projects (14)||blog (40)||reviews (0)||forum topics (16)||buddies (45)||favorites (162)||activity log|
1577 posts in 1056 days
Location: Brooksville kentucky
Hi, my name is Justin. I recently, in the last year or two, have been getting back into woodwor.
I currently am an engineer(mechanic, mr fixitall for a tugboat company. Odd work schedule, work and live on a boat for roughly 3 weeks, but home for the same.
-- Justin - the tugboat woodworker - " nothing changed me like the first shnick from a well sharpened, decent hand plane"
Latest Activity | view all »
|replied on||off to Pop Wood for LN event||04-18-2015 03:01 AM|
|replied on||"State of The Shop Address" - Post Yours||04-18-2015 02:54 AM|
|replied on||"State of The Shop Address" - Post Yours||04-17-2015 10:35 PM|
|replied on||Shop Made Tool Swap - 2015: Hand Planes and Spokeshaves||04-17-2015 01:07 PM|
|started topic||off to Pop Wood for LN event||04-17-2015 12:53 PM|
|replied on||Millers Falls 67 router find||04-17-2015 12:07 PM|
|commented on||Toolwell Mitre Box Station||04-17-2015 04:10 AM|
|commented on||Second Saw Bench||04-17-2015 03:04 AM|
|commented on||Mobile table saw cabinet||04-17-2015 03:00 AM|
|replied on||"State of The Shop Address" - Post Yours||04-17-2015 01:42 AM|
|replied on||"State of The Shop Address" - Post Yours||04-16-2015 05:57 PM|
|replied on||Handplanes of your dreams||04-16-2015 05:11 PM|
|replied on||"State of The Shop Address" - Post Yours||04-16-2015 04:55 PM|
|replied on||"State of The Shop Address" - Post Yours||04-16-2015 06:14 AM|
|replied on||"State of The Shop Address" - Post Yours||04-15-2015 11:42 PM|
Latest Projects | view all 14 »
Latest Blog Entries | view all 40 »
The two previous images are from 4 weeks ago before i left for work. The back was done up with pine i had on hand. Unfortuently as i was installing the last couple boards i noticed they had developed some twist and that i had a knot too close to a...
After i finished the previous steps i decided, despite what Schwarz says about it, to put some finish on the inside. No pictures, figured no need. I masked off all the edges i didnt want anything on, then applied roughly 2-3 coats. Really all i di...
Broke out the eggbeater drill, brace with countersink bit, and a screw driver. Marked out my holes with combo square and awl. Drove in some #10 1 1/4 slotted screws by hand, ended up with a blister. . 4 per side per shelf, overkill i belie...
measuring/marking out the dados for the shelvesmarked out the bottom shelf 8.5” above the dovetail baseline with a knifeused the shelf to mark the other side of dado in the same manner after cutting a “knifewall” Used my Millers ...