LumberJocks

Box with Inlay lid

  • Advertise with us
Blog series by Tootles updated 08-23-2011 03:03 PM 2 parts 12827 reads 16 comments total

Part 1: How not to do a wooden hinge

08-10-2011 09:20 AM by Tootles | 0 comments »

I recently posted a project of a box with a wooden hinge where I said ”I wouldn’t do it the same way again”. The best way to explain why is to explain how I did it. Yes, I know there are a lot of other ways of doing this, but I did it this way regardless – call it an experiment if you like. I made my box in a workshop that is part of the local education system. One of the odd constraints that put on me is that I was not allowed to use the table saw – the person in...

Read this entry »


Part 2: Making the Inlay Lid

08-23-2011 03:03 PM by Tootles | 16 comments »

Now I said in my previous blog, about the hinge on this box, that I probably wouldn’t make the hinge quite the same way again. But I was very happy with the way the inlay worked and that is worth repeating. So, this is how I did it. The first thing that I needed to do was pick the size of the forstner bit that I wanted to use. I chose 35 mm (about 1 3/8”) because it just felt right in proportion to the size of the top. Then I marked the centre of the top which is the centre...

Read this entry »



DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase