I bought a package of four springs at Home Depot. You can put a spring at the back or at the front. I tried the different sizes in different places and picked the 4” one near the front. I put it on by gluing short pieces of dowels, one to...
|View Tom8021's:||home||workshop||projects (17)||blog (6)||reviews (0)||forum topics (1)||buddies (1)||favorites (0)||activity log|
73 posts in 2749 days
Latest Activity | view all »
|commented on||A magic box with help from the Grr-Ripper. And a haiku contest!||06-03-2011 08:56 PM|
|commented on||Silverware drawer organizer||03-19-2011 02:45 AM|
|replied on||Plunge Router accident routs my workbench||03-03-2011 12:37 AM|
|replied on||Plunge Router accident routs my workbench||03-03-2011 12:12 AM|
|replied on||Plunge Router accident routs my workbench||02-28-2011 12:48 AM|
|replied on||Plunge Router accident routs my workbench||02-26-2011 09:30 PM|
|replied on||Plunge Router accident routs my workbench||02-26-2011 08:31 PM|
|started topic||Plunge Router accident routs my workbench||02-26-2011 08:14 PM|
|added project||Display Cabinet||12-14-2010 01:06 AM|
|commented on||Boxes||11-27-2010 07:35 PM|
|commented on||One Smooth operator||11-21-2010 10:39 PM|
|commented on||Bamboo 2||11-05-2010 05:49 PM|
|commented on||M&M Dispenser||11-04-2010 08:49 PM|
|commented on||Boxes||11-04-2010 04:50 AM|
|added project||Boxes||11-04-2010 01:23 AM|
Latest Projects | view all 17 »
Latest Blog Entries | view all 6 »
Some scroll work requires you to tilt the table. I accomplish this by allowing the table to pivot on the tower end and created a trundle on the opposite end. The thing to remember is the top of the table is 5” off the base. With the table w...
The tower needs to be beefy. I had some 7/8 ASH laying around so I used it. Everything hinges on the tower so don’t be shy adding a few bolts. The lower part ( 2 1/2×15 1/2) is just bolted to the base with three lag bolts. I dri...
To make it so you can adjust the tension on the blade I took a 12” threaded screw and put it through oversize holes in the back end of the arms. I put a nut on the bottom and a adjustable knob on the top. The other end was a bit ha...
Let’s go over what my dimensions are: I used scraps I had around the shop, Base 32×16 x 3/4 melaminetable 36×12 x 3/4 melamine Arms 36×3/4×5/8 oakarm support (rides on top of the arm) 30×5/8×1 1/2tower 2 ...