Last night I disassembled the drill to prepare it for cleaning.
The handle on the crank was bent and loose so I decided to take it off to try and staighten it.
Removed the flanged roller and eccentric.
With the roller removed the main gear can come off.
The drive gear is held in place with a pin and needs to be driven out.
This allows the rod and chuck to come out.
The handle is pinned and threaded, I drove the pin out the unscrewed the handle from the frame, no pics of this.
Here is the drill completely disassembled. Now on to the cleaning.
-- Good judgement comes from experience and experience comes from poor judgement.